• I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes. Click to Support Signs101 ...

Search results

  1. New banding problem

    Not sure why but certain colors have developed a banding issue. I did the nozzle check plot and replaced 2 heads although they weren't really bad. Aligned heads and tests plots seem fine. Cleaned mulriple times. This may have started after replacing the cyan cartridge last week. Could it be a...
  2. HP 360 Adhesive buildup

    I have the spares but they just get glued up too. I clean them off but within a few feet they are cruddy.
  3. HP 360 Adhesive buildup

    Had this issue on another printer as well but the right side edge of wrap vinyl has some adhesive exposed. The first roller gets gobbed up with and and wants to pull the wrap up. I'm using the edge holder but if I don't feed extra vinyl to start it will get crumpled there. Can that roller be...
  4. Does anyone know if there is a way for the printer to bypass reading/detecting ink cartridges?

    So I went back and looked through emails. yes I had to send a file from the printer to get a file back to upload to the printer. Basically the carts always look full until the manual flag on the cart gets tripped. You can put any cart in any slot including cleaning carts and it doesn't care...
  5. Does anyone know if there is a way for the printer to bypass reading/detecting ink cartridges?

    I have a used VJ-1324 that has been unlocked. Basically want it gone. Maybe the boards will work with your printer?
  6. S2 160T not cutting in correct location?

    It has no problems with smaller files. Also I usually can resend the problem file and it cuts fine the 2nd time around but a few parts are already fubar from the first attempt. Not sure if the file it too big but I can see that.
  7. S2 160T not cutting in correct location?

    Contour cutting a 48" x 108" layout. It goes through and finds all the registration marks fine. Then for some reason starts cutting 2" out like it scaled the file smaller? Doesn't always happen, usually I try same file again and it's fine. Using gosign that it came with.
  8. Any Interest in a VJ-1324??

    I have a VJ-1324 printer that hasn't been used in a few years. Was flushed after last use. Has a take up reel and flashed to use chipless carts. Found out the hard way that solvent printing wasn't for me as I just didn't use it enough and more ink was used running cleaning cycles than...
  9. Where to get ink supply tubes for VJ-1324?

    Thanks henryp for the pics. I just cant seem to find those parts anywhere. It also seems like its heated in place. Joe House I did try to clip a small amount off but then it doesn't fit quite right afterwards. You can see on #10 above that there is a slight taper right where it goes in to...
  10. Where to get ink supply tubes for VJ-1324?

    No one? Does this mean I have to get a factory service guy to order factory tubes? Probably cost as much as a new printer!!
  11. Where to get ink supply tubes for VJ-1324?

    So I think I've narrowed down my problem to be with some of the ink supply tubes leaking air where they connect to the dampers on the head. I'm seeing some small air bubbles in the lines. I'd like to replace them but can't seem to find them or how to do it. They have a 90 degree bend in them...
  12. This printer or software just #*&#*^# hates me!! Whats this???

    You win. Seem you've been called the forum bully a few times here so i bow to you. I'm gonna go brush up on my file uploading skills now. BTW Look up passive aggressive.
  13. This printer or software just #*&#*^# hates me!! Whats this???

    Wow Gino do you work for Flexi? don't take it personally. If you want to compare computer skills I'd be more than happy to take on anything you have, been in the IT field since punch cards. I was told by others that I couldn't post an image directly here and had to host it on another site so...
  14. This printer or software just #*&#*^# hates me!! Whats this???

    Ok so I solved my own problem but will post here to maybe help others. So I don't know how but the profiles in Flexi rip and print (3 of them because I tried multiple) all had the color adjustments changed. It's a little odd how it does it also. The first screen has "all colors" selected and...
  15. This printer or software just #*&#*^# hates me!! Whats this???

    The images are uploaded to google. One more try. unclebun why is it now printing a transparent black over everything? I've printed this fine many times before.
  16. This printer or software just #*&#*^# hates me!! Whats this???

    Lets try this link https://photos.app.goo.gl/eFCHea8hUUu9tq9k7
  17. This printer or software just #*&#*^# hates me!! Whats this???

    hmm maybe so. I can see the 2 images fine, you can't? Basically one image is a screen shot of what it should be printing and another pic of the printer just printing big blocks where the whole layout is.
  18. Now Selling HP Latex 300 and 500 Series Printers

    Chris does your website not allow for ordering supplies directly? I purchased a used 1324 printer and the previous owner purchased it from you and used your inks so I thought I should stay with the same brand. The website doesn't seem to have a place to order from. OK Edit. When I click on...
  19. This printer or software just #*&#*^# hates me!! Whats this???

    OK I've printed this layout many times before now for some reason it want to fill in the background. Import to flexi from coreldraw been working fine. Did I change something by mistake!!!! WTFH!!
Top