Search results

WOW is just one of the different wave patterns that the ValueJet series of printers can use. There are about 7 different wave patterns WAVE, WOW, FUZZ, FINE&FUZZ, FINE&WAVE, SUPERFINE WAVE A, and, SUPERFINE WAVE B. To change it on the keypad of the printer you go into the Menu > Setup > Set 3...

Does it print the lines on the return pass in bi-directional or in both passes? Also when you say that you are changing it from bidirectional to unidirectional what print modes are you using? Some print modes change carriage speed not just unidirectional and bidirectional and this could...

The print head that is used in the Epson GS6000 is not the one that is used in the 1608H. The newer 1608HA and 1608HS use the same head as the Epson GS6000. The head that you need is Mutoh's Part # DF-49684.

Like everyone said above you definitely need a vinyl that is specifically designed for this application; normally most vinyl manufacturers sell kits that include the vinyl and laminate, at least the manufactures that we sell do. As for the installation the manufactures all have installation...

It looks like an air leak to me. One thing that you can try to do is to swap the ink lines that go into the Lt Cyan and Cyan heads. If the problem then goes to the Cyan head, now printing with Lt Cyan ink, then you know that the head itself is good and it is probably a problem with a damper or...

Does the print start out normal and then get worse or are the prints bad as soon as they start? If it starts out good and then gets worse than it is most likely a problem with air getting in the cyan lines somewhere, you can test this by swapping the cyan and light cyan dampers, without...

You can't really tell what is causing the problem from the calibrations in the attached picture, what does the nozzle check look like? Are you missing the same nozzles every time or are they changing? Also have you printed out the Palette test on the printer to see how that prints, it is...

It all depends on the software that you are using to drive the plotter; it must be able to send to an IP address. I know that Flexi will work with this setup; this is how we have the FC8000 setup in our demo room. Linksys makes a wireless print server, once you have the print server up and...

Is this a FC7000 or a FC7000MK2? The FC7000 series had an issue with the Y-Pulley that connects the motor to the while belt that drives the carriage. If this is the case you can open the right hand side cover of the unit and locate the motor in the top front corner of the cutter. If you hold...

You can replace any of the heaters in the ValueJet printers, they are taped in place.

The VJ-1204, 1304, 1604, 1614, and 1608 all use the same print heads. From the picture you either ordered the wrong head or were shipped the wrong head. I believe that all of the ValueJets sold by Mutoh America have an A at the end of the part number, I haven't been told this but I think this...

The VJ-1204, 1304, 1604, 1614, and 1608 all use the same head. I saw the picture that was posted in the other thread and the problem you are having is you were sent the wrong print head.

Because it is a rebranded OEM product from SignWarehouse they are the ones responsible for all support / repair work. Mutoh does not offer any support on the unit and will refer any caller back to SignWarehouse, even for basic phone support. Another thing to consider is that with SignWarehouse...

There probably wasn't any damage. The printer cuts the power once it detects something is wrong. Once the cables are back in correctly everything should work. Sent from my Droid using Tapatalk

When I learn how to do cart wheels I will let you know. :ROFLMAO:

You shouldn't remove or tape this down, this piece keeps the print head capped, once the print head is in the maintenance station the printer relies on the head resting on this piece to keep it capped and without it the head will move to the left and will expose the nozzle plate to air. The...

Could you have reversed the cables to the heads? Double check and make sure that all of the cables are inserted correctly.

This one isn't a Bluetooth head set and isn't the cheapest but works with just about any type of phone. I have been using them for over three years and can walk all over our office and I even get reception out at our mail box that is about 100' away threw the 12" concrete wall of our office...

Graphic Resource Systems has partnered with givemehelp.com and SAi to host a Flexi Certified Training seminar! There are six focused 2-hour training sessions on specific subjects that address your individual needs, in addition to the introductory “What’s New in Flexi 10” session that will...

Do you see air anywhere else in the inks lines or just by the dampers?