Search results

Both?

Hey All, I'm having a very odd and frustrating issue and looking to see if anyone has any ideas or feedback. I'm working with Flexi and Summa on the problem as well, but no real answers yet. I create small stickers as part of our offering, I use Flexi 12 to do our designs and print/cut. A...

Looks like Gerber released Omega 6, they just forgot to put it on their site, announce it, or let anyone know? I found out about it via an email from Hyatts... http://www.hyatts.com/pdf/SIGNOMEGAWhatsNew.pdf http://www.gspinc.com/learning-center/omega-software

rossmosh, thanks for the feedback/guidance, I have not used plastic for our signs yet, a customer asked if we could do them on plastic and I'm now searching for a supplier and what exactly we would need. For our alum signs, we buy them from Grimco, .040 blanks. What would you recommend in a...

Good question, the goal is to mount lam'd vinyl signs on. SUBSTRATE: 0.04” (1mm) Low Density / Semi-Rigid PVC Plastic MOUNTING: 0.20” diameter holes in each of 4 cornersHoles offset 0.25” from adjacent edgesMounting hardware not includedCORNERS: 0.25” Radius Corners Thanks!

Only looking at maybe qty 50 to 75 in total for right now.

Folks, Looking for a supplier of 10 x 14, 7 x 10, 18 x 24 sizes of plastic sign substrates. I use Grimco for my alum plates, but they don't carry pre-cut plastic ones. Any advice on who does carry them? And no, I am not interested in buying bigger sheets and cutting them down. Thanks!

Tried it, had a horrible time trying to get it to work with HP 3xx latex, various profiles/heat/etc, just couldn't get it working, it was jamming, buckling, etc. Wish I was able to get it to work. Edit: This was their cal product, not cast.

Marty, can I ask where you purchased it? I'm looking at the GFP's, but hard to find someone around Northern VA that sells them.

I'm using only 30", various media types, all same problem. Tom

I'm also having tracking problems with a new S2T cutter and Flexi Cloud. The first 8 to 12 inches are fine, I go beyond that and it cuts down and to the right for my flex cuts, the longer the job, the further off the cut is. Working with Flexi and Summa to try and find the root cause, so far...

If they drop this in a 30" model, I'm buying one!

Thanks JB, already did, looking for more!

Hi There, Anyone have links/locations where sign/signage vectors can be purchased, hopefully in bulk packages like these guys offer? We are doing more and more safety vinyl signs, and would like to expand our offering by buying pre-made vector sets if they are available. Thanks!

Seriously? I've been doing it wrong, I move the substrate down, cut it, and then move it back. Last thing I'd want to do is put cutting tools inside near everything...

Just FYI, the 310 has the touchscreen too, I'm pretty sure the HP 110 does as well.

Does that mount to the table or just sit on top of it? How do you handle feeding the lam through it? Can you make a short video of you using it? I'm in the process of looking for something other than a big squeegee, but don't need a full 55" laminator machine, as most of what we do are small...

Sorry for the junior level question, but can you explain the process us Hp 310 owners need to go through here? I have profiles I've loaded from vendors (Oracal, Grimco, etc) before the .12 firmware upgrade. What do I have to do on the 310 series to get color accuracy back?

DO IT! I did it 25+ years ago and have never looked back. I've built and sold a couple of successful tech companies along the way, and I am semi-retired now and dabble around in signs and decals, because it is fun! Don't live your life with regrets, you don't want to look back in 30 years and...

Northern Virginia, that is correct. It's a bit different than Southern VA or WV, the running joke is Northern VA should be it's own state. But no, I didn't know who he was until I Googled him. Another country singer, the one genre of music that I don't listen to...