Search results

I have the milwaukee version and love it....

We have done that same tailgate wrap on a Ram Truck for our local FPD. We used standard cut vinyl yellow reflective on the excessive curved tailgate and the install was difficult and fairly tedious. The new Avery V-4000EZRS comes in Yellow and would probably make the installation much...

If you are printing and laminating you should get the full lifespan of the vinyl and laminate no matter if you put it on coro or diabond....I have 1/2" coro 4x8 signs that have been up in excess of 7-8 years and still look great but they get no sun on them front or back because of print on front...

Could try masking it....sometimes that works if its not to far gone

I agree with the above we have done a few elevator interiors and doors. They are the most disgusting filthy things to work on. Lots of cleaning in all the nooks and crannys....

Installed a new maintenance station.....

We used to buy our ink from Premier Color but due to a number of bad ink cards and they were very difficult to work with to get them to stand behind. We no longer do business with Premier due to the horrible service and product they provided us. My dealings with Francis were far from positive...

I had high tac vinyl get stuck once in a Mutoh caused it to crash like this. Ended up having to replace the mainboard....not fun!

Also check your blade and holder could either have a very small chip in the blade or piece of vinyl stuck up inside the holder... I have seen both cause cut issues.

I have an extra - complete take up real system from a VJ1624....new still in the box...if you think it will work make me an offer...Pretty big box so i would guestimate $80-$100 ground shipping...

40/42/40 - low as you can go and still get a good print/ink dry run head height on high.... this stuff is nasty if it gets too hot and the adhesive squirts out the sides of the vinyl - the problems it causes can be pretty bad

Yes we have had the same problems with Avery colors on both the High Performance and Intermediate Vinyl. For about 2 months there was no movement. Now it seems to be getting better. NGlantz was my best option for getting material during the shortage. They could get it dropped shipped direct...

Firesprint.com....I believe they are a merchant member on here as well

Sewing Specialties in St. Louis MO - usually ship same day...314-781-7570

3m Gold for 99%

I can email you the .pdf file I have for the 2018 Chevy 4door....just send me your email address

Sign Builders in Alabama 1800-222-7330 - I usually work with Mona for parts or Eric Watson for complete signs they are great to work with....they offer partial to complete assembly or all the components to DIY. www.signbuilders.com

Spray adhesives have there own issues. The overspray is a constant issue. Gets on your prints, equipment, skin etc. and causes problems....We mount some prints this way for a local "art" shop that prints their own posters.... It is a serious pain if you are doing any qty at all. I would much...

We use this almost exclusively. It works on 99% of the adhesives we run into for removal. We have tried a few other brands to try to save a few dollars but keep going back to Rapid Remover.

in Flexi I think it is called print count - bump it up to 2 and change the interval to 2 or 3 depending on how much color your putting down....