Search results

Nice job...I like the standoffs selected

I would like a copy of the manual for the 1624 I have the service manual for the 1614 if anybody needs a copy info@rapidgrafx.com thanks!

from my experience with this....it will throw up the error to a specific color/cartridge first if it is the cartridge and not the printer and then following error message for all cmyk if it is just a bad chip on one ink cartridge you are good. more likely it is the chip reader (this is what it...

We used to do a ton of these 4'x8' and 4'x4' with the big Squeegee without lamination. Obviously on say 4'x4' you can go across the flutes and there is no problem going with the flutes its almost impossible to not get air pockets and or bubbles.... Just make sure your print is dry for 24 hours...

Metallic Arts - www.metallicarts.com 1800-541-3200 Sign Builders - 1800-222-7330 great for changeable copy letters, track etc

just like everybody else stated... reverse print on clear. laminate white apply to to acrylic wet to avoid any imperfections... Here is one we just did

when printing on ARLON DPF8000...we align the media so the top and bottom edge are not under the rollers. This is on a Mutoh so not sure if you can do this.... We print a lot of this stuff and its horrible how the glue comes out the sides gets on the rollers and then the roller peels up the...

my 1624 will do this same thing on 3751 and 3551 but not usually on 3640. It shows up worse the darker the color. Usually goes away after the first foot or two of print. I usually crank the heat down to 40-42-47 or a little lower on the dryer and it will usually fix it... Never see this on my...

I have a warning on my Mutoh1614 (Lifetimes PF Motor). Can anybody help me get into the Menu to reset the lifetimes? thanks in advance!

I switched to Flexi Photo Print DX (print n cut version) Reason: I have upgraded printers and added printers through the years they have been great with vendor based support and not nickle and diming me I am sure other RIPs are better. I thought at the time Wassatch color profiles were better...

Had this same problem with Wasatch a couple years ago with the purchase of a 1324... We switched RIPs and never looked back...had at least 3 more printer upgrades since and no issues with current RIP/Upgrades

They had the wiper in backwards at first but I turned it around....and they re-used the old wiper. I will order a new wiper... Thanks for the HELP!

I have a 1614 that was recently serviced under maintenance. They replaced the capping station, print head and dampers. The printer is printing fantastic....however it seems to be very "messy" back by the capping station. Overspraying ink heavily back in the area of the capping station. It gets...

thanks for the tip!

I need a dozen Clear decals 11"x4" White Lettering Printed on Clear I need them printed today and shipped overnight to receive by tomorrow....can anybody help me on this one?

super 77 spray it outside...

65

La Bella Vita

Wanted to share a couple cool old pictures of my Grandpa. His health is failing so I was going through some old shop pictures and thought I would share with you guys/gals as you could appreciate the nostalgia and skills of the "old timers"...

we contacted our Rep and also sent out an FYI to all the local vinyl shops in our area