Search results

We have multiple clients using the Roland HTM2 and FDC 9303 PU materials. We are running a free ground shipping offer on the Roland HTM2 20"x50' rolls if interested. Give me a call 1-877-602-4237.

Keep us posted and hopefully my recommendation helped as discussed via Facebook.

Only drivers available within the Flora dealer site is for the PhotoPrint product. I would recommend you contact Scott at Graphix Direct - 855-428-0060 The Onyx Printer and Profile Downloader program has the Flora listed. http://www.onyxgfx.com/devices/flora-printer-km1024/

Is the Limit/Cutdown procedure completed successfully? no error?

SP-540v in the first sentence. You might try applying teflon tape to the metal rail and are the plastic mylar guide rubs against. It is also possible the plastic mylar guides were not installed correctly, or the white ribbon cable is too tight or does not have enough slack. A little difficult...

Have you tried cleaning the material with Alcohol and then reprint?

http://support.rolanddga.com/docs/Documents/departments/Technical%20Services/Manuals%20and%20Guides/rvw_printinggrey.pdf Roland Enduser Support Doc. A bit old but still relevant.

How old is the unit? Consider replacing both left and right pinch roller wheels. One may be slightly more coned than the other from wear.

It is possible the profile was updated if or when you ran a VersaWorks Update.

Check the VersaWorks Log File regarding the two jobs.... chances are a different profile or Color Management Preset was used.

General Formulations just released a 3mil clear with optically clear removable adhesive. Give me a call Monday morning for pricing and details.

This could be wire tension, left side wire pulley bearing, linear rail bearing, motor, encoder, encoder sensor, servo board

Is it throwing an 0090 error code?

Sold ! Sold. Call to get information on our latest demo and refurbished units. 1-877-602-4237

Big price reduction on demo model Contact Bobby Fosson at 877-602-4237 for details.

Let me know if you need an activation code to start the subscription. You will need to have one prior to signing in.

So the tape is not holding the printed image in place? when you peel the backing, the print is not stuck to the transfer tape? What ink are you using in your Roland? Most standard clear transfer tapes will work with this product as well... The polyester tapes are reusable.

I would be happy to offer some assistance if needed. Support and Sales. Simply give me a call.

I would suspect damper as well. I have seen similar issues on the BN-20.

Looks like a heater line caused by paused print or the like. The heater settings of 104/100 are sufficient. Have you tried the GCVP Profile on the Oracal 3651? Change Pre-Press to Max Impact or Sign and Display Is this Air Egress adhesive? I would also like to see a nozzle test, just to rule...