Search results

Our supplier for banner material will slit the roll to any dimensions we choose. Hopefully your supplier has a slitter on site and then it is very easy.

Impact Canopy in Corona, CA makes something similar called a field board. http://www.impactcanopy.com/business/signs-banners/field-board/ Hope it's ok to put a link...

We use both the 1/4" and 1/8". After doing layouts with painters fineline tape for years on paint jobs we use it the same way. 1/4" for longer lines or sweeping curves, and the 1/8" for tight turns.

I've never had this happen, but looks like wear from the top to me, maybe from the car cover rubbing on it. It appears he uses one since it is in the picture so I would guess it is stored outside with the cover and any breeze with a little dust could cause that I would think. Looks like it's...

thank you tiki!!

Just need the West Coast portion... PLEASE and THANK YOU

We gave up trying to install wall graphics unless it is a wrap with Phototex or 3M, the new paints and the amount of different textures make it a headache. This was our solution and will be for anyone that asks. 1/4" acrylic with standoffs in the corners. This one is 4' x 2' and went up...

Salt River looks to be a version of Denmark

We have made patterns on our Roland XC-540 by fitting a sharpie where the blade holder goes. We needed a thicker line than the pens that Roland sells. I haven't tried it but I would think there would be a way to get a chalk pen to do the same onto some chalkboard vinyl. Most of the ones I...

Got this from a customer, looking for numbers similar to this. Thank you in advance!!

We just had a vendor call to delay a job due to equipment problems. Looking for someone near Orange County, CA to screenprint 100 banners 25" x 96" 2 color. No hem with black grommets. Of course we need it quickly now. Any help would be appreciated.

I was just doing this on a layout the other day and was going to post here asking this exact question. We do it on almost all of our designs. It gets tedious at times but i just can't let it go out without fixing it.

If you're on Instagram metrosignsinc or metrosignsinc.com out of Florida does alot of them. I would reach out to them I'm sure they can help.

Yes they were built with all 2" tubing. For the casters we got threaded casters and welded a plate to the bottom of the tube with a long nut or coupling nut welded in the center of it. Also something I learned in the process was to use "total locking casters" these not only lock the wheel but...

We built our own steel leg tables with 3/4" tops and just added the Rhino cutting mats.

We have 2 - 5' x 10' tables with Rhino mats that came with a printed grid you put on the table first then the mat over it. You could certainly print your own. They also do sell smaller ones with the grid printed directly on it I believe. I personally like the look of the cutting mats on our...

Stand-offs For mounting to the wall with our larger prints, we use a french cleat system. You need one at the top and then a spacer at the bottom. We attach them with a high heat glue gun. They may have just connected the 2 creating a "box" on the back with some vertical pieces. That would...

We source ours out to a larger local sign shop that has a laser and a router. We don't do them that thick but I'm sure it can be done.

I saw that too, I'm just not sure it is hand drawn for something like that. We are using it for a different purpose or i would just copy it. Thank you for looking!

I have searched but can't seem to figure this one out... any help is always appreciated!!