• I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes. Click to Support Signs101 ...

Search results

  1. Roland camm-1 CX24 communication problem

    Give more detail about the laptop, software being used and connection cable type... Just not enough info given to start.
  3.

    FC7000-75 cut bad (see pics)

    Could be the blade holder... take the blade out and drop some 3-in1 oil or fine machining oil onto the bearings in the blade holder... May be a little grime in there not allowing the blade to swivel properly. Seems tight??? are you referring to the actual cut head assembly as it relates to...

  4. ce5000 - 120 stops cutting mid job

    Have you tried a new USB cable? Could be loose connection or conflict within your PC on the USB ports and devices using them.

  5. ce5000 - 120 stops cutting mid job

    If the cutter thinks it is out of material, you can hit the enter key on the keypad and it will continue on. Sometimes happens if the rear media sensor is tripped. Does the cutter display any kind of message when it stops?

  6. sp 540 cut config

    It could be your software overwriting the cut config on your SP. Check the driver options within your RIP

  7. 4mil Cut Vinyl - Signs101 Members Save $5 per roll

    bump

  8. Casmate Help

    Going to be expensive unless you find an older version but upgrades are available to the FlexiSign product line. Plus, Flexi will import Casmate files where many other programs will not. Feel free to contact me if you have any questions.

  9. Casmate Help

    Might also try searching the following string: cas*.ini

  10. Flexi PRO 8.6 to Pro 10 Upgrade - 50% OFF Promo

    22 days left for the current promo - and remember, Signs101 members get special pricing on all flexi full version and upgrades from CiberSupply.com Get 50% off your Flexi SIGN PRO v8.6 to v10 Upgrade for PC Only! Call CiberSupply for special Signs101 pricing. 1-877-602-4237

  11. Casmate Help

    Try Caswin.ini

  12. 4mil Cut Vinyl - Signs101 Members Save $5 per roll

    Bump

  13. Casmate Help

    Close the program and search the system for this file, casmate.ini Delete it and reboot the computer This works very similar to clearing preferences in othe programs.

  14. Help! File format not supported

    What version of Flexi? This was a known issue some versions of 6.x and early versions of 7.x if I remember correctly.

  15. 4mil Cut Vinyl - Signs101 Members Save $5 per roll

    CiberSupply is now stocking 4mil Intermediate cut vinyl in 10 colors. Excellent film for those low cost jobs that still require a glossy, easy to cut vinyl. This film is not a cast product and will not perform as a cast product. Recommended for relatively flat surfaces with simple to no...

  16. Roland FJ Head Dropout

    If the color is dropping out while printing, you are more than likely getting air into the system. Is your Test Print (Nozzle Check) ok? Post a pic if you can. If your test print is Good, and you still have drop out while printing, it is more than likely damper or cap station. If you are...

  17. Wanted to say thanks!

    Welcome and thank you for the purchase.

  18. Roland FJ Head Dropout

    Could be ribbon cable, heAd board, main board.

  19. Presentation Folders

    As long as you download the template and present good artwork, GotPrint.com does them. I have had a number of them done by GotPrint and been happy. http://gotprint.net/g/uploadPresentationFolder.do

  20. Signpost puller?

    And just when I thought about buying in bulk for resale, you go and ruin it! :) Kidding of course.

  21. Signpost puller?

    Maybe one of these? http://www.postpullers.com/ http://www.gemplers.com/fence-post-removal
Top