Search results

The OEM dampers for the VP last a very long time. Rare that I change any for the XC or VP series in a long while.

What software will you be using? Both are very good units and cost may about the only difference... Warranty and functionality are about the same. I have the CE5000-60 in stock and can ship immediately... Give me a call for great price.

General rule of thumb when using the machine on a regular basis, every 6 to 8 months. The more cleaning you do, maybe 8 to 10 months.

Still awaiting final details and ship date but we will be selling a takeup reel for the Roland Versacamm SP-300/300v/540v and Pro II models. Introductory price is $795 plus shipping. "ReelPRO" Specifications: · Power Supply 110v · Accommodates rolls up to 45# ·...

Contol Panel>Network Properties>NIC Card (right click-properties) Check the middle section (white) to see if the NWLink IPX/SPX is listed. If not, click on Add>Protocol and select from list. Reboot after install and try again.

+1

FC = bigger, badder, faster - more down pressure, more options, better tracking CE = medium duty, vinyl cutting with occasional print/cut contour jobs

Do you have another media to try? banner, paper, different brand of vinyl? Overspray can be caused by different things and static is one of them. Cleaned the encoder strip lately?

Installed Cutting Master 2 v 1.71 today for a client and no issues.

What version of CM did you download an install?

After taking the sensor out of the printer, Slide in edgewise back and forth... should work its way in there

How long is the network cable? While directly connected to your printer, disable any wireless capabilities. What version of Winders are you running.. I might have missed this. Make sure you have the NWLink IPX/SPX protocol is installed for your network card, if you are using Windows XP

What version of Flexi do you have? What Ink are you using? Which Roland machine? Head Height setting, hi or low? What type of media being used? What brand of media being used? Last but most important, include an image of your nozzle check here for us to see.

Lint free eye glass cleaning rag

Sounds like network lag, collisions or faulty switch/router.

Buy a network switch... connect both printers to the switch as well as the computer. Then as Sparky mentioned, assign different IP Addresses to the printers and you should be good. What printer to you have and what are you intending to add?

A "Graphics Guy"... No wonder you had trouble with the Graphtec :) kidding... Glad to see you introduce yourself to the forum. Good to have you and look forward to reading your input.

Take the blade holder out for now to use for dry runs and simply watch where the path is being followed... will save material. Is it cutting a mirrored image or simply a rotated image of the job? Call me at 606-922-4609 and I will try to help over the phone.

So it is set to feed from the back and then to sense the front edge of the material... Does it do this correctly? What version of Flexi? 7.5, 7.6, 7.6v1, etc... Which crop mark settings are you using?

When you load the media into the cutter and set the pinch rollers, what options are given 'exactly' on the Graphtec LCD?