• I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes. Click to Support Signs101 ...

Search results

  1. Graphtec FC700-75 Cross Cut blade

    http://www.cibersupply.com/store/index.php?target=categories&category_id=48 Offered in Standard and SuperSteel for use with High Intensity Ref. Not cheap but they should last a good while.

  3. Cheap Software

    Wish Aurora luck in forcing the closure of a russian owned site/server. We could all help by not supporting such crap.

  4. missing text curser in flexi 8.5

    Update to 8.6 and see if that helps

  5. Flexi Crashing

    Could it possibly be a memory issue? RAM, HDD, Processor Type/size ? Sure sounds to me that the computer/program is struggling. Give us some more detail.

  6. Any Decent Cheap Plotters out there?

    The APD Cutters are very strong and easy to operate. Available in 24, 30, 40 and 48. http://www.cibersupply.com/store/index.php?target=categories&category_id=19

  7. Graphtec serial cable

    http://www.cibersupply.com/store/index.php?target=categories&category_id=51 9 pin and 25 pin cables available.

  8. How to host a forum?

    http://ezboxx.com/ezboxx/index.asp Might be worth a look

  9. How to host a forum?

    Simple Machines is an easy to run forum. http://www.simplemachines.org/ Your hosting account will need database access for best results.

  10. How to host a forum?

    Find a hosting company you are comfortable with and get a shared hosting plan with a control panel and access to free software. Aplus.net is one host that offers a variety of plans. Look at this link Running a dedicated server takes a little knowhow and may open you up to some un-needed...

  11. I need help choosing Software for my cutter

    The Refine cutters will work with either the Creation, Roland or RedSail drivers. All of which are supported by CiberCut Max ($695) and FlexiSIGN ($1195) Feel free to contact me via PM, phone or email if you have any questions. With the driver issue in question, we could help you with...
  12.

    I need help with head adjustment

    Service mode > Horizontal Alignment May not be the only alingment needed... Whomover replaced the head did not complete the adjustments.

  13. can't get pdf to cut

    Export at EPS and resend

  14. pattern paper walks when plotting

    Thicker weight papers do not walk as much. Less flexibility.

  15. Looking for bright Roland color swatches

    The Roland library for Illustrator is on the VersaWorks install disk.

  16. Has SAI (FLEXI) Gone under???

    SA International - Salt Lake Tech Team Update Initial hours will be 8:00 am to 5:00 PM MST The toll free telephone line (800-229-9044) is switched from Philadelphia. The esupport@saintl.biz email will continue to work and is recommended for all emails.

  17. Banners printing S•L•O•W

    Also make sure that you are using bi-directional.... If set to uni-directional, start pulling your hair out.

  18. roland sp300-Temp to low

    Error is there by design. Operation Temperature: 15 to 32 degrees C (59 to 90 degrees F ) (20 degrees C [68 degrees F ] or more recommended), Humidity: 35 to 80% (no condensation)

  19. roland sp300-Temp to low

    Either too cold in the room or possibly thermistor cable. Seen this in many warehouse environments.

  20. flash drive keeps asking if I want to reformat?

    Static has caused this on several of my usb flash drives and either I received format prompt or 'insert CD-rom' prompt.

  21. Inks for PNC and pc60

    non of the colorcamms really share the same cartridge, with a few minor exceptions. The PNC-5000 and PC-60 units use completely different cartridges and are not compatible.
Top