Search results

It is printed. Many thanks for replying!

Hello Flexi experts! I have a large trailer logo about 125 x 50 inches that has a contour cut applied to it. Since this is going on an old, riveted trailer, I would like to cut it into 3 length-wise sections with two 1 inch overlaps for the 3 sections. It has already been setup for a contour...

race cars get used up pretty quickly..

Thanks buddy. Greatly appreciated!!

I have a job to wrap a C6 Corvette's front & rear quarters, doors and nose with matte black. I'm looking at: 3M CONTROLTAC OPAQUE FILM WITH COMPLY ADHESIVE/ECONOMY WRAP VINYL MATTE which can be seen here: 3M Controltac Opaque Film with Comply Adhesive/Economy Wrap Vinyl Matte | FELLERS - The...

Interesting! Nice to see some confirmation of the problem. I agree the IOM may be OK for indoors but no more outdoors (at all) for us. Thanks for posting!! ((nice Indian))

Thanks Buddy. I appreciate your insights. Lee.

Thanks! One question I have - If using heat, will too much tension on the roll cause the lam to stretch on installation onto the media and, over time, possibly shrink back after final install? Thanks again Boss!! :)

Instant One Media. - Agreed on $$$ What don't you like about Oracal? Thx..

Hi, Typically we use Oracal 3551 or 3651 with 290 Gloss or matte. ((have not had failures with Oracal)) - The failure occurred with IOM 5110-G and IOM Matte laminate. Moving forward we will stay with Oracal, but if the IOM can be made to stay together it might be OK for flat signs. So, the...

Curious to know if any of the experts on this board have tried hot laminate on materials that are sold/spec'd as "cold laminate." Reason being we have experienced delamination of the clear top on a couple of jobs, particularly on trailer in the rivet areas. Just curious whether as to what the...

wow lots of inks opinions! The Bordeaux dealer wants $500 to unlock the ink system. How much does STS charge? Thanks.

got it. Thanks again Buddy. BTW, did you look at the Bordeaux system? thx.

- Does this system retain a smart card? If so, any read issues on the 3rd party cards? Thanks again.

goes here on the 1624 media roll carriage. (not a seal part):

goes here on the 1624 media roll carriage. (not a seal part):

huh? under which cover? never mind I found it under the media roll.

Well. I suppose some may be familiar with the seal, others the 1624 and respond accordingly.

It is an Allen Head. Found on the floor under the left end of the Seal Base 62 - Anyone know where it belongs? Thanks in advance!

UPDATE - it was found in an area where the Seal 62 also resides, and, there are other similar bolts (but larger) on the Seal unit. I will continue my search there.