• I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes. Click to Support Signs101 ...

Search results

  1. roland sc-540 good bad ugly?

    If you could get better pictures it will help. Request a picture of a nozzle check and some printed samples. Buying used equipment it is always a gamble.
  2. Roland Cleaning Liquid?

    How long have you been using 3rd party inks?
  3. Cutting Master for Coreldraw X5. When?

    I don't think you will see corel X5 support for a while because Corel does not immediately release the code outside developers to use. :(
  4. Anyone change a cutter Main Board?

    Yes, you need to Enable and re-calibrate the arms, it should only take 10 minutes to do it.
  5. What to do over a long weekend

    Ohhh.... On the Falcon Outdoors; If you are gone for a weekend, then just turn it off. If you are gone for vacation for more than 8 days, then do a head wash.
  6. Maintenance Station and wiper replacement VJ1604

    You got me confused for a second when you mentioned there was not instructions for replacing the MSA ( Maintenance Station Assembly ). The capping station it is a part of an assembly and you are right, the service manual does not show how to replace it but, if you have the exploted view diagram...
  7. Maintenance Station and wiper replacement VJ1604

    Spring? Are you trying to replace the MSA or just the capping station?
  8. What to do over a long weekend

    What type of Mutoh printer you got ?:help
  9. Cutting Master for Coreldraw X5. When?

    Have you asked Graphtec when ?
  10. End of Roll Error......

    Sometimes if you are using banner the cardboard core will stick out, cut the end of the core with a hacksaw and that will help to reduce the chances of getting the annoying End of Roll error on the 1204.
  11. Maintenance Station and wiper replacement VJ1604

    Do you have the American or Europe version of the service manual?
  12. FC7000 doing perf cutting?

    This should help: http://www.graphtecamerica.com/FAQs/setup_FC8000_perf-cut.html
  13. VP540 Banding in Magenta only

    Can you scan or post a better image ? I can't really tell anything based on your images... TY
  14. VP540 Banding in Magenta only

    When did you replace the damper(s) ? Did you check\replace the O rings? Are the heaters working all the way across?
  15. VP540 Banding in Magenta only

    Is that in the scan width or the feed direction? Can you please elaborate "banding" ? There is a lot of different types of Banding, white,dark, horizontal banding, etc
  16. Double pass setting?

    I also use it on Back lit signs
  17. VP540 Banding in Magenta only

    Sounds like a dampers issue.
  18. Mouse Freezes

    Me thinks you answered your own question
  19. Error Code

    On longer jobs I normally use the Graphtec Segment Type Marks. As far as the Cut\Plot window not coming up, You might want to uninstall or disable your firewall or antivirus if you want to troubleshoot applications that do not function as expected behind a firewall.
  20. Mutoh Printing on 24pt carolina stock

    Sorry I just do not have suggestions on that... Try what tryingtolearn suggests
Top