• I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes. Click to Support Signs101 ...

Search results

  1. Wasatch to Valuejet fault

    Yesterday afternoon I set of 3 separate prints and lastly a layout print of 3 files from Wasatch to our Valuejet 1604 and left it merrily printing away. I checked it to confirm colours and quality during which time I set up a few other jobs from my next print run. Well everything was fine...
  2. Mutoh VJ1604 take up unit has given up!!!

    My take up unit has given up on my Valuejet 1604. Has anyone ever dismantled and repaired one of these units? Cheers SC
  3. Signlab9.1 patch issue

    Has anyone had any issues with Signlab 9.1 new 1.06 patch? They have already rectified one of the problems with a replacement dll file, but I am still having issues. SC
  4. Valuejet Broken Chip Problem

    I have run our Valuejet 1604 over the last couple of years on bulk ink. We have smart cards to the rear which has worked faultlessly (except for a set of chip readers which is due to old age). On Tuesday Evening whilst waiting for some new ink and cards I ran the printer over night. When I came...
  5. Valujet Chip Reader Damage

    Hi all I run my Valuejet 1604 with an aftermarket bulk ink system which has worked very well for the last few years. About 6 months ago I had a problem when reinstalling a cartridge after fitting a new smart card (to reset the ink levels) I damaged a couple of the internal chip readers. At the...
  6. Wasatch 6.2 on Windows 7 64bit

    I am on with upgrading all the work stations all with new i7 processors 16gig of Ram and SSD drive and 1tb storage and Windows 7 Pro 64 bit I have stumbled on the first one which is our primary RIP work station and am trying to install Wasatch 6.2 and it will not install. My question is will...
  7. Will Wasatch Cut

    I use Wasatch 6.2 to print from at the moment and use a Mutoh Valuejet and a Mutoh Ultima to contour cut from. I am on with upgrading the plotter and am looking at a Graphtec FC-8600 as I have always like Graphtecs plotters and I am getting a real good deal on it. The issue is that Wasatch6.2...
  8. Graphtec and Wasatch possible difficulty

    I use Wasatch 6.2 to print from at the moment and use a Mutoh Valuejet and a Mutoh Ultima to contour cut from. I am on with upgrading the plotter and am looking at a Graphtec FC-8600 as I have always like Graphtecs plotters and I am getting a real good deal on it. The issue is that Wasatch6.2 at...
  9. How to get it through a clients head that their artwork is useless!!!!!!

    How do I get it through a clients head that their artwork is useless!!!!!! They are claiming it has been designed in photoshop and illustrator. But when I get the artwork it is 72dpi and 3" x 3"! This is to be printed at 5'x5' and is completely useless for what I and they want to use. How can I...
  10. Help with this one please?

    Hi Some help please with this one. It has come up before but I am at a loss. Sorry about the photo best I could get at the time. The "k" seems to be the most prominent and all the corners are rounded very slightly. Cheers SC
  11. Cleaning Brushed Stainless Steel

    Around our local town we have a large amount of stainless steel directional signs and Information boards. Stainless Steel has been used as we are a coastal town and used to have a huge steel industry. These are manufactured from Brush Stainless Steel but the finish is discolored and tarnished...
  12. Mutoh SC 1400D Contour cut issue

    We have always had an issue with this plotter cutting contour cut prints and it seems to get worse the longer it is. On checking today when the plot had finished (and run off) the left hand roller was no longer on the material. This is a machine problem and not a software one. Is their a way of...
  13. Mutoh VJ1604 Still have sub tank low errors

    On my Mutoh VJ1604 I still have sub tank low errors after replacing the sub tank valves. What should I change next? I notice the sensor is triggered by a metal plate attached to the sub tank bladder, which seems a little hit and miss. It must be still working as the machine would not work at...
  14. Replaced Sub Tank Valves on VJ1604 Sub tanks not refilling.

    I have just replaced all the Sub Tank Valves on our VJ1604 due to errors saying the sub tanks were low and becoming a to common issue. I have installed these in accordance to the maintenance manual. But on trying to do a test print it keeps coming up as subtanks refilling and looking at the...
  15. Bunny 1400 problems

    We have had this laminator for a few years. A couple of months ago the lock nut that stops the roller coming down to hard came loose. This has upset the way the machine applies laminate now. My question is how do I reset it back to what it should be? Thanks SC
  16. Wrap Requirement and Disclaimers forms

    I am looking for a form to give to a potential wrap customer explaining how we need the vehicle when left with us. The issues I am having is that customers are leaving us vehicles with damaged paint work, rust and in a complete filthy state and cannot make them understand that the vehicle needs...
  17. Mutoh Valuejet how many metres has it printed?

    Is their a way of showing how many metres the machine has printed in its lifetime? I have an old Mimaki JV3 and I believe you can do this on this machine. Just was wondering whether it was possible to show on the Mutoh Valuejet? SC
  18. Opinion on Arlon Wrap Material

    Has anyone used Arlon DPF 6000 series films for wraps. I am just trying to compare it to 3m IJ180 materials. Their is almost a third in price saving between both materials, and every saving counts. But not at the risk of failures! SC
  19. PET/POP UP Material what profile?!!

    I have a Valuejet 1604 with Wasatch 6.2 RIP. I am wondering what profile I should use when printing PET/POP UP Banner material? I have none on my huge list of profiles. Many Thanks SC
  20. Some help with this one please?

    Thanks all. SC
Top