Search results

Question about profiles. The IJ40 Profile was one that Onyx pulled from the printer and the other above came from the 3M site. The IJ40 is contone and the 3M download is stochastic. There is a dramatic difference in black screens just from running a couple tests. It's been a long time since I've...

I don't switch between media very often and just stuck out because it was much larger. Didn't think it would affect that, but I get that it might be that resolution change of the profile. They are both 720x1440 although the dot pattern is different between the two and one is HQ and the other is...

Just wondering if this is normal for this text to change when you change the media profile. Didn't think switching to a different media would alter this text.

I used to do them on my Summa with a 2-pass cut. I used a 36 degree but a 60 would probably be better. You just have to be very careful to not cut into your cutting strip below. You're pressure will likely need to be much higher if you're going to cut through the backing material. You really...

You can still get a desktop version with the same features I believe, but it comes with a cost versus going to the online only version. My understanding is that you can purchase the new desktop version to be able to keep using invoices paid online or payroll, etc..., but you will have to make...

Whether it's their job or life that's got them down, I'd say just a chat with them about it is worth doing. Just simply asking someone who may be depressed or feeling undervalued, what can help them or possibly alleviate some of the feelings, will do wonders. I felt like that at my previous job...

That's why I got 10 pre-installed when I bought it. I was a bit worried I might run into some compatatbility issues running onyx 19 on Windows 11. No need to switch to something if the previous one still serves it purpose just fine.

Went through and reset my cutter in Onyx and tested a the quick set that I had printed from to test just printing and did a print/cut and it worked fine. Just a damn hiccup it seemed. I had tested each individually but not with the print/cut all in one. It'll be nice to RIP on a faster system...

I'm trying to get my new workstation setup and running. However I'm running into an issue. I've imported all my media and quick sets to my new install my cutter is connected. When I try to print a job with a print and cut setup it just processes and then drops into the archive area and says...

Yeah CM4 is still there. Here is the link to it. https://www.graphtecamerica.com/legacy-software

I'm avoiding CM5 for the moment until until I learn more about it. You can always install an older version of Illustrator that will work with the CM4 plug-in.

Nice! I didn't even think to go back and look at that. You rock man! Thanks!

Yeah I remember because I was talking with you about it when I got my FC9000. I'll have to contact them this week and see what they say.

Left is my current system I've been using for a few years. Right side is my new system I'm setting up. The "Manage Cutters" dialog is totally different and my Onyx versions are the same.

What would cause me to have two different dialogs in the "Manage Cutters" window? I know there were small updates for cutters that I had downloaded through their support site, but it's completely changed from last year. I only remember because I had to download a patch for my FC9000. Maybe the...

So I'm trying to setup my new system and getting everything configured. Seems as Onyx has removed all the downloads for patches/updates to cutters to this program and anything legacy. I know there was an update for the FC9000 because my cutter dialogs look completely different despite being on...

One reason why I'd buy a system like that directly from Dell. I've heard newegg doing some shady stuff with components and also they have 3rd party sellers so you have to be careful to see if newegg is actually shipping it or if it's coming from a 3rd party, like what amazon does.

As the subject line states. I'm looking for an alternative to Drytac polar chrome. I like the subtle metallic look of it but it's a bit pricey for the small product labels I'm using it for. I really haven't found anything similar that I can use. Any recommendations would be very much appreciated.

I'm waiting on my new machine to come in. Tight on space here so I'm on a laptop, which one thing I noticed is most don't have ethernet ports. Does anyone use a USB to RJ45 adapter for the connections? Just curious how that works for people. have never used USB connection since I heard it's less...

I absolutely dislike the conversion because of the fact they are imperfect and virtually impossible to edit after. It's a quick fix IMO and only use it in a pinch.