Search results

Or Cut reg marks off an old job and stick over the silver glitter ones

I do your option #1, #2 and #3 on my graphtec 8600-130 and 8600-160 all day every day from sizes 2x3 oval to 12x24 rectangle and ocasionally some 24x36 ovals. Haven't used the perf cut in two years. Once you know how to operate and set up your cutter you can Die Cut or Kiss Cut any shape. My...

Have you tried raising or lowering your head height?

Now it sounds like your material isn't laying flat against the cutting strip or your blade is too far out. If this continues make the call Phil Johnson Airmark Corporation (800)527-7778, ext 112

YOU WIN

Just smile and redo the job at no charge. But when he comes to pick it up ask him for the first set back so that you can put it back in Inventory and when he says WTF you smile and say gotcha. You will make a new friend and a life time customer that will refer you to all his boat buddy's.

I just finished printing eight rolls of Flex Mag 30.5"×50' roll to take up roll on my Roland Eco Sol XR-640 . No problems at all. Each roll yielded 600 + individual magnets sized at 5.1"×3.5". 22 designs at 28 each. Solvent ink dries to the touch pretty quick and dry enough to cut within a...

I'm grabbing at Straws now. My problem was resolved when I replaced the ribbon cable

Sounds like there not communicating fully. Try Reinstalling Onyx

Call for a warranty repair

The ribbon cable that drives the head.

If it has a cut groove where you have cut too deep it WILL throw your cut depth off. Had the same problem with a Mutoh Kona cutter

If you have gone through the two blades that came with the cutter, it's time to change your cutting strip

Replace the planar cable. Try shutting down the cutter for a minute, then turn it back on and resend same job. If that works it's the cable.

Sounds like it is chewing on multiple jobs. Delete all completed jobs from flexi production manager then recreate the cut file only and send. Also Check your cables and make sure cutter is installed to the correct port.

Scan motor. Clean gears and lubricate them well.

Try resetting up media on printer and make sure your feeder rollers are in there correct space, especially the ones on each router side. After it is finished setting up then hit the user defined icon (the ? mark). If the printer is printing a job it won't read the media size, it has to be set...

I also heard today Tubelite sells it.

We use 99% Isopropanol in our fountain solutions for our offset sheet fed presses. We buy 5 gallon cans from Mac Papers our paper supplier.

Fantastic News that you figured it out. You should demo a Graphtec for cutting that many Decals if you want to keep up. I'm currently running three printers and two Graphtec cutters a 130 and a 160. I print 15 100ft rolls of General Formulations 220-54 6 mil gloss per week which produce 2000+...