Search results

This same thing happened to me while using QuarkXPress. It would not open after my Mac did an update. To fix this, I took this Mac offline and changed the date back five years and the program runs perfect again. Alot of programs have a expiration date (8 to 10 years) then they shut down. By...

I too have been using 99% Alcohol on all of my rubber. From the rollers on my sheet fed presses, pinch rollers on the graphtec, Royal Sovereign laminator rollers and the Vaccum mat on the flat bed graphtec cutter. I have Never had any problems with it drying the rubber out.

I have the XR-640 and its the Cats Meow. I print a 100' roll of 6 mill every day on in it, then the next day while printing the next roll i'm cutting the 1st roll on the Graphtec 160 cutter. A great combo.

Looks like low res artwork

Do a nozzle print when you notice this happening to rule out any ink flow problem then look into Ginos Signal Interruption

BRING IT. Im also set up to do offset printing and I can beat them up on the price. Don't think i'll loose any customers to them.

I own some rental property and I get daliy calls from so called investors that want to buy my property. I tell them somebody knocked on my door and made me an offer, half on the books and half in cash and I can keep the rental income for the next eight months. They all say thats illegal and you...

This is how I do it in flexi, weather it is an individual job or multiples. Set up design with two cuts. 1st cut is the kiss cut the 2nd is the final cut. Print job, next day I set up job on cutter, open job in production manager, shut off final cut and just send the 1st cut through. After 1st...

Tube Lite $136 Mac Papers $140

General Formulations 220. 6mill. Comes in a 54" x 100' roll for under$150. If it's indoors your inks should last three years with out laminate. I use 12 to 15 rolls per week with no problems.

Check pressure on all pinch rollers, one or more could be worn and not applying enough pressure to track evenly. They should all be the same or it will start to skew the media you are cutting.

Printing on Seiko W64 and W54 also on Roland XR 640. Decals, Real Estate signs, Window Graphics and general signage nothing huge, YET. Customers love the quality and appearance.

GF-220 is a great 6mil Gloss vinyl. I use 15 rolls of 54" every week with NO Problems

It looks like it is trying to find crop marks.. Make sure you're cutting the correct file.

As Bubba06 posted. Always use the same Color cut lines. You can set up your cut lines with any color, but before you click the check mark change the color of the cut line to your cut style. ie. I use Red cut lines for regular straight cuts, so if I have a red background I'll set it up with a...

Sorry I missed that part in your post.

Sounds like your pinch rollers are not applying equal pressure or they are slipping. Try cleaning them with alcohol first then refer to the manual for adjusting. Same thing happened on both my Graphtec cutters

Printing 4 Resale. Jacksonville, Florida 866.998.0911

I was using that silver foil tape For a project and took a 3" strip of it and peeled the backing off, then not thinking put that strip of tape between my lips then went to use it and pulled the skin off my bottom lip. That tape sticks to EVERYTHING.

If you are using the roll take up and you don't tape the media onto it straight, it will skew and creat a tent or ripple effect that the head strikes against and that skid mark. If you pause the printing when the media starts to touch the floor place three pieces of tape along the edge of the...