Search results

There is no way to do the timing adjustment manually. The scanner alignment tool can easily be found on the internet and the scanner is a home grade one. You need the service dongle to set the head parameters if you swap. Where are you located? A FF comprehensive technician should be available...

The only filter in the subtank is the last chance filter in the air line. Subtank issue would affect both M-channels. You can try a subtank maintenance and see if it helps. This is described in user guide. I would go for the printhead itself. If you can access #adjust you can try to raise or...

In your router you should exclude the fixed IPs from being provided to dhcp requests.

Yes. For sure.

Clean your printhead gently with a lint free cloth and let it sit for 15 minutes. Then check if one or more heads build up ink on the nozzle plate. If yes, replace the meniscus filter in carriage.

You will need a set of all ink cartridges, cause they are marked to be intermediate tanks and can’t be used ascink cartridges. To replace the pip you need to take a picture of the sticker on the frame of the sensor. After installing go into diagnostic mode and enter the values in the sensor...

Hardwareplattform of 630 is used in several products (700,800,Z6pro,Z9pro) and at actual stage it behaves stable. Gen4 inks are common since several years and have the advantage of the overcoat which can be unchecked if substrate is laminated. Small text is printed way better thanks to new...

Try booting with a win10 or 7 bootstick and do a chkdsk. Maybe it is able to repair the structure. If disk is really dead, I could send you a new one. Or images to create one on your own.

How far you have dismantled your printer? most probably you have shorted a cable with cover parts. I guess the cable of the inner light. Disconnect the black 6pin connector on the right side on the ceiling of the printer.

I have images of all partitions stored and able to recreate a new hdd. All your settings and alignments are stored in different locations and will be recovered from there. Where are you located?

Envoyer le fichier log et je vais le regarder pour trouver le raison.

Je suis sûr que le problème vient du câble de données. Le câble FireWire qui traverse la chaîne porte-câbles finit par se fragiliser.

If u are happy until now with HP Latex I would suggest to wait with the decision few weeks. There will be an good alternative shortly…

This is a contone printer. Even if sending 100% Black it will be printed using C and M. I would go for 100/60/60/0 KCMY, because until 60% it uses Lc and Lm, which will use way more ink. Or you create a media preset with CMYK only to prevent from using light inks Have you done linearization and...

Just the amber led means printer is off on frontpanel. Does leds change when pushing the the fp button? The button should alight, and what happens on the rear led‘s? And maybe you can check the 3 led near network connector.

To change meniscus vacuum you need access to service mode. The restrictor valves close to the pump and the relief valve are meant to regulate the speed of applying/releasing the negative pressure.

What happens if you switch the unit at the main switch? Please provide the status of the three LED’s near the main switch

This is nearly impossible. Sleep mode is meaning that the panel button is blinking. Is there initialization of any device working? Is the carriage moving?

I would go for the main ink filter. To me it looks like the unit can’t fill the reservoir in time.

But Cutting and other devices are not available in the HP SAI license…