Search results

I would guess it is PSL = Pressure Sensitive Latex otherwise I'm not sure

+1 done this plenty of times

it sounds like they are rough with the material especially if they are tearing mesh banner. not sure that perforated aluminum will hold up any better.

did the roof also, how did that go? Use ladders or scaffolding. What material do they use? especially with a lifetime warranty on no fading.

formed fitted fabrics are either dye sub or full solvent from my understanding the level of "clingy" is due to the template used for sizing instead of the material. you cram a 300 lbs person into a size medium shirt....... yeah its going to be CLINGY regardless of the material. some form of...

we purchase from creative market many time before and are always pleased with the files if you are wanting extra protection, before opening (extracting) the file, R click on it and scan it with your virus program to double check

+1 for the 5600 series, make sure you have a new blade and do a test cut for accurate pressure & depth

Three Cubic Yards with a weekly pickup runs us about $76.00 per month for the illegal dumpers make a sign telling the penalty for illegal usage put a lock on the lid put a security / motion activated camera in place

whatever process you use, the key point is to get and keep the banner material taught. the "wind whip" by having loose material is what causes the damage

yup this, unless you are expert level you want the transfer tape and the bottom layer needs to be applied dry especially if you are coming right back for another layer.

http://www.vectordoctor.com/

same here, the corner on the base piece (white material) has been broken off as long as they function the same and continue to be a main part of the everyday usage then I am open to either option

:noway: and here I thought me and John had a special connection, now I find out he is 2 timing me and price shopping else where..... I'll show him I will refuse to fill this order, that will teach him his lesson.

we are also running a VS-640 and have seen the same over-spray and in the same color CYAN. our tech did a fill print test pattern while in test mode and he said it was an indication of the head failing. we are still using the same head and started doing more printing regardless if it was a job...

we have found that PVC is a great table surface, comes in 48 x 120 sheets make sure you get a minimum of 12mm so you can use both sides of the material

+1

thanks for the update, its saved in my font folder as "Immature Dawn" but will correct typo

Measure EVERY multiple times before cutting. nothing worse then doing a ******* size 39.75" x 92.5" and then realizing it is marked & cut wrong

Thanks, The straw is a good idea, will have to start using that

Immature Dawn Is a good option that is pronounced and easy to read