Search results

firware Thanks, it is fixed, but if you want to share the latest firmware with us

You got it brother! I'm here, what ever you need and for free,:thumb: no $250 dlls an hour fee like some companies I know

Falcon JR finally working! Thanks randya, einsteningraphics, and all the great people of this forum, it was the CW adjustment, it is very hard to calibrate all the bars and lines and input all the changes, after a roll of paper, 12 hours of head braking, and the change to cmy=no as per randya...

Going crazy with K color Yes I entered the correct head rank for both heads and they are mechanically (by hand) aligned, no matter what I print, nozzle check, test print, black head tilt, color head tilt, the same thing happens; the black is offset to the left 1 3/8 of an inch, in head color...

Hi guys, I have done my part reading and giving some advice in this wonderfull forum, but I just can't find the door right now, I totally rebuild a Falcon Jr with the help of this forum, everything works 100% as it is supposed to, but the black color is printing exactly 1 inch and 3/8 to the...

This is what I used I have done a few replacements on Mutoh Falcon's witch by the way have the same main board as yours with an automotive fuse holder and a 1AMP fast acting fuse, for me it works fine; but I advise you to first look for the source of the problem, your fuse blew up for a reason...

10 steps to unclog ink lines Same thing happened to me in all 4 colors, follow this steps and your all set 1 buy a vet syringe from a veterinary supply 2 temporarily remove an ink line from capping station and fit it to the end of the syringe (it fits perfect) 3 disconnect damper and place...

falcon JR printhead fuses Hi everyone, I don't want to discredit anyone with this post, on the contrary I only want to help. Here is my fuse scenario that makes a lot of sense from a technical and logical point of view: I have been searching the forums for printhead fuses amp rating, so far I...

I am on san antonio tx if you still need help with your pump PM me

mutoh parts These printers are exactly like cars, once they leave the dealer they depreciate 50% or more and so on as time goes by. Quick tip: mutoh uses epson print heads, Epson=Japan, if you buy an original epson print head is the same one that your mutoh dealer is selling, about the "mutoh...

ink profiles, do we need them? OK first of all this is my very personal opinion, I don't mean to insult any one's personal believes. If you are trying to match a color samples for a picky customer or you need to output on media the exact color for a corporate logo such as cocacola, or...

undefined paper error Just an update , I got the undefined paper error again...........now it was due to the front bottom cover (the stainless steel part with the heater strips where the paper lays flat on) being loose from the bottom screws, I just raised the stainles steel cover a little bit...

Ok Guys I have the same undefined paper error, these are the steps I have done to pinpoint and fix problem: the sensor to blame for this error is the one next to the black printhead, to check if the sensor is workink go in diag (power off, press cleaning , menu, and shift at the same time, don't...