I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes.
Click to Support Signs101 ...
I did just that also at the damper side on the cyan ink line. There wasn't much ink there until I sucked some. I still had the same problem. After checking the new cyan damper, it looked suspicious and barely had any cyan ink in it, so I replaced it again and sucked the ink line. This time it...
It does print black,cyan,magenta and yellow from left to right. Cyan comes out very light almost invisible. My lines are connected as shown in the sketch. The cap tops are new. I heard about cross contamination somewhere, but on explanation as to what it is and how to solve it. Just the two...
Hello,
My SP300V prints dark red instead of black and light yellow instead of cyan.
I just replaced all the dampers and also the cap tops. All the installation was
done correctly.
I did a solid bar print around 1x10 inches in black and another in cyan both
at 100%. After many tests, I still...
Thank you for your input Unclebun. If it's clogged, is the solution to replace the dampers? Can the line be clogged also, if so how is it de-clogged?
Many thanks
Hello,
Does anyone know what the problem is for getting a darker print color then lighter on the same run or any as shown in the picture? It happens when the machine is powered up, starting with a dark color and getting lighter.
I've been using the same file for a long time until just now the...
Does anyone know the procedure of replacing the print head manifold on the Roland SP300V?
Are there and precautions to be observed and especially does the print head need to
be re-calibrated?
Many thanks in advance
currently the heat for the Print is 37 and for the Dryer is 40.
Change both, if so by how much.
I forgot to mention, the material is around 2 months or less old.
If you want to see the test print pics...
https://www.dropbox.com/sh/zu29doolzoov99x/AABSxYJSvWzhQPozj0JWsX5Ea?dl=0
Can anyone help with a problem of grainy print on Roland SP-300V.
I am using orajet 3551 for a long time with the color profile from Oracal also.
Perfect media no problems.
Recently I moved the machine from PA to TX and did go thru the procedure
outlined in Rolands SP-300V manual when...
Rvw
Mine is Win 7, SP1. I just did your last suggestion and will see what happens when Win 7 is shut down and rebooted. I have Norton Antivirus installed, but not renewed.
Rvw
Thanks a bunch. Did the initialize after which it asked me if I want to install the Printer Driver. It failed on installing the Printer Driver, but VW launched OK. After a while I will see if get the same error when Win 7 is shut down and rebooted.
Rvw
It still did not work. When verifying the printer, it puts in the ink type which is in the Roland printer SP-300v. Under Edit then Preferences there is no tab to set the ink type. My VW is 4.6.1
Anymore suggestions?
Anyone know how solve the problem of "printer and ink type used differs from the one being used" when launching Versaworks. I called Roland, they could not solve it. I was given a solution of uninstalling and reinstalling VW by Roland tech support. When uninstalling all the VW folders were...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.