Search results

Hi

Thank you for the insight Castek, I had a similar error but am unfortunately unable to even get into the maintenance menu to diagnose the issue. It looks like the hard drive may be the best place to start to get things back up and running.

Hi, So, did you ever find a solution to the problem? I have a similar problem with a L25500. Thanks, Marty

Hi Dypinc, thanks for the reply. That was the first thing we tried. We then removed the heads, the inks... I now notice the LED's on the OMAS controller board are not lit. From the best I can tell, the LED's on the other boards and controllers are lit normally for the boot-up process...

Hi, We normally leave our shop hardware powered on and allow machines to sleep when not in use. However, we recently powered down our HP L25500 and upon restart, we get a 79:04 error. Immediately after powering the machine on from the front panel, we hear two beeps (from the motherboard) and...

Well, after the third attempt, we had success. It hung for about an hour and we finally did a soft restart with the power button. It went through its normal routine and is back on line with GG-CAL_7.0.0.4. Now... let me see about this color issue...

Darn. After two failed attempts, we restarted and tried again. This time, the printer accepted the file and restarted. After a few minutes, it beeped and now shows a 100% on the progress bar and a big goofy hourglass. The green LED on the left side of the screen just blinks. It has been...

Hi everyone, We were having color issues with our 42" HP L25500 and spent some time poking around on the HP tech site and discovered a new firmware version: GG-CAL_07_00_00.4_mvl40. We downloaded it and are now having trouble installing it. Has anyone else tried this update and if so, did...

The oil is PN#6040-0855 and the pads are PN#Q6651-60081 I took a look at the paper shredder oil and it probably begs further research. The Fellows oil i found is Canola oil - http://assets.fellowes.com/MSDS/35250_MSDS.pdf While the HP is a synthetic -...

Watchfire or Optec.

We like to use sheets of acrylic (typically black) and wet erase markers like: http://www.hubert.com/pres48652/Chalk-Like-Markers.html Once dry, rain will not wash it off and dirty little kids can not use their fingers to erase selected letters. The markers are expensive, but our customers...

Thank you Dale Thank you Dale for the discount and fast shipping. We have not had a chance to use the B-S but am sure it will be a big help for some small jobs. Thanks again for your assistance, Marty

Hi Dale, It looks like I am finally ready to jump in and try out one of your lamination tools. Do you still have the discount code available? We are looking for a 30" tool for applying over laminate to prints. Thank you very much, Marty