Search results

This is a problem I've had since I've owned my machine.I have a Roland VP540i. I'm using 3M 180. I have a 4 color design. This is a repeat customer (my best customer) and everytime they get new trucks in I go to print using the same material, same profile, same everything and the gray comes...

I've had the same problem. The smears would pop up through the entire roll and in places I had not touched and always at the end of a print, so I'd have to throw the whole thing away. Not only the smears, but lines are visible even on unprinted material. I called Clear Focus, they said the...

Forgot to mention I did try a different profile.

I have only used Clear Focus perforated vinyl for vehicle windows. Everytime I've printed on it I get these weird lines. You can see them on the unprinted vinyl as well. It's not really noticeable on lighter prints, but pretty obvious on dark prints. It's not my printer. Anyone else...

Thanks a lot for the replies. My printer has a print heat and a dryer heat. The print heat was at 36 and the dryer heat was at 40. I didn't know there was an "LTR" until the box came and I thought I got the wrong stuff. I was thinking maybe I got a bad roll. It seemed like if I kept it moving...

I just bought my first roll of Avery supercast ez rs ltr. I've heard great things about it at shows. So far about $75. worth is in the trash. It's printing awful. I'm using the correct profile. At first I thought it was my printer (Roland VP540i), so I did a thorough cleaning. Did some more bad...

I have to chime in on this one even though it's been solved. I spent a good 10 hours trial and erroring this very thing. Roland had no answer either. There are numerous things that will make it not show up in VW. 1. CutContour must be on the top layer and named as such. 2. The stroke must be...

I just did some stripes on a boat using Oracal 3551 which is supposed to have "clean removability up to 4 years". Less than 24 hours later, I decided to redo one of the stripes and it took me a half hour to get the left over adhesive off ( I didn't even set it with heat or go over it with...

Bannerups confirmed they are the antigrommeters and their hand held is just a hole punch. Still looking for the all in one hand held that I saw at ISA. Thanks for the input slamdunkpro. I bought some tabs yesterday. I'm thinking indoor use won't be a problem.

When do I graduate?

That's not the one I saw, but it's definitely the same thing. I emailed Bannerups about their hole punch. If theirs is also a grommet installer, they need to say so... they only describe it as a hole punch. Ok... I always thought a newcomer to a forum was called a "newbie". A...

Thanks for the responses. It wasn't a hand press, but a hand held. Like the hole punch, but it actually punched and installed the grommet at the same time. They were $100. at the show. It's not the hole punch that BannerUps has (although I think I'm sold on their edge tabs ---easier and...

I was at the ISA 2010 show in Orlando and saw a small booth with a hand held grommet machine. One squeeze made the hole and installed the grommet. They also had some impressive banner hem tape. I thought I got their card and info, but I can't find it for the life of me. Anyone know anything...