Search results

Did a force purge and a head swap Alright, so the new cables and board left me with the same results I was getting before, only this time(after the board exchange) I cant get light magenta or light cyan to print. They share a head. I had another head lying around so I plugged that in. My...

Able to boot up I was able to boot up the machine properly with the light magenta head to board cable replaced with one of the older ones(the ones that were replaced initially). I have received poor results plus my heads were dried out from non capping during my wait for new parts. Does...

Anything, Anyone? Now when printing I hear a high pitched noise and its not delivering any ink through the carrige/heads. Anything, anyone?

Repluggin - in parts As far as plugging the cables back in goes I know I have a problem somewhere, I just don't know what just yet. In order to isolate my issue I decided to start simply and break down my issue. The cables that connect to the slider board I broke into three parts, the top 5...

Hey all, First off, any information will be better than the none am currently stuck with. Had an issue last week for error code 07 (----*-) so I called my tech man and got some testing info. Swapped the two print head cables on the slider board for the indicated head... Power off, Unplugged...

I pressed a wrong key while in maintenance mode and now my mutoh is trying to go through the cleaning cartridge procedure and my yellow cartridge card wont read, I suppose I am stuck, any information will help at this point... I need the service manual regardless...

I want everything you sign making types got on this. Reviews of products, brands, types, methods, and more. I've been making most types of signs, banners, stickers and wraps for three years and have considerable experience with this. Just want the whole enchilada. Im most curious about double...

aside from the darker line distinguishing the split?

Hey all, So I have just replaced our Mimaki JV3-160S not SP's Head-2. This machine is a three head machine, K-M/C-Y/LcLm in that order from left to right when servicing. So I have just replaced Head-2 with a brand new head from mimaki for this machine. And I need a lot of info on Head...

When I am doing the media comp on our mimaki should I be looking for the line below the dark line(white space) to disappear completely or to match the spacing of the black line to the upper gray bar(looking through a loupe).

getting somewhere I think it is a capping station issue. Tried a manual draw on Friday and I heard air coming through capping station on head #2, leaned on carriage slightly and tried draw again. I had ink flow when pressure was applied to carriage. Working to find my issue's source. I have a...

I have some mutoh cleaning cartridges and I need to do some work on the mimaki. If I take the solution out of the cartridge pouch can I clean the mimaki with it?

Hi All, We've had his machine for a long time and its manufacture date was 2002 so its by no means new. I have done routine maintenance with head soaks, wiping heads outsides with mimaki cleaning fluid, and cleaning wiper/wiper gears. Did a damper change this morning and now it wont even print...

Truth We have one of these 160s machines from 2002 and its only just starting to give me problems. If you can get a newer one then do it.

I have the Gerber CAT|UV No truer words said. When this printer (which its discontinued now) works it works great, but gerber service isn't even service. Don't buy a flatbed printer from GSP. Do your shopping.

Hi I have a Mutoh VJ 1204 and our computer crashed and we lost all of our manuals. Can someone email me a .PDF of the Mutoh Service manual? Also any tips on possibly calibrating media comp would be spectacular! Thanks a bunch!

Gerber CAT|UV We have one, works good a lot. When it doesn't it costs thousands and tech support only has one good guy. Flatbed = Gamble. We use Graphtec for cutting and Mutoh for printing. Everything but the Gerber works fine 100% of the time.

Grey coming out pinkish We are experiencing a problem with our VJ1204 where when we print Grey we have a Pink-laced grey that comes out... I cant figure it out without printing the image(a background) alone.

Basically, I want to know everything anyone knows about this error. I get this error sporatically but spaciously. I may get it one day and then the next time i see it is like a minute to a month apart. However, I want to know anything about this for anyone who has this porblem also. We are...

What is the ink usage on this printer?