Search results

Hello all, I have an SG300 with TE inks (official Roland ink for emerging markets) and print on Hotmark1792 transfer vinyl from VWDual which runs on Win10. I created a custom media profile using i1 profiler and the result was excellent. After a couple of days my prints came out reddish. I then...

The first error (0012) is a power voltage error. It does not reach the required voltage on turning the sub power on. I wouldn't expect this error with the sub power off (as it was in your case?). The second error is related to the linear encoder or the motor stop moving. Regardless of the...

It's unlikely but could this be the problem? Maybe there is communication but you use a version which doesn't support VS-300. The latest version (6) only supports VS-300i. As for communication I always try to send a ping through command prompt, have you tried that?

Hello people, we have a Roland RT-640 for a while now and for the past week the printer misses nozzles after 2-3 meters of printing. Also it does automatic cleanings very often, almost before every print, which doesn't sound normal. I attach an image of the printhead. It is very dirty and those...

Have you tried to print without color management? By doing so, you disable the input/output icc profiles (in your case you are interested in the output profile) and use only the linearization settings for printing. If the peppering effect is gone then you are certain that this is a color...

This could be a color management issue. To verify this, print a file without color management and see if the problem is gone. If it is, then you either create a new icc profile with a black start at 30-40%, or you test other profiles until you find one that prints without peppering. The term you...

Printer linearization is a procedure that has to do with specific parameters (printer type, inks, resolution, passes...). The reference profile (or simulation, or target if you like), is not among them. What you are looking for when you limit your inks, is the point where they get too saturated...

Thank you very much for your input guys...

Hello all, would you reccomend to use tacky paper with a rotary heat press? From what I understand it is meant for flat presses to anoid ghosting mostly but what is the case when it comes to sublimate elastic textiles? Wouldn't it help to avoid, wrinkles for example, on a rotary heat press...

It could be a pump related problem. A pump malfunction "returns" the ink to the printhead instead of flushing it.

Hello people, is linearizing a new media possible with Rasterlink pro5? Mimaki profilemaster is only for profiling or for linearization too? I have found a trial version for Rasterlink but not for profilemaster. Isn't there one available? thank you in advance