Search results

Roland VP-540. Replaced 2 heads (black and blue) and did the pump up because i changed dampers. Did the ink fill and couldnt get any ink to flow through the lines. Got the yellow and magenta to pull through the dampers and into the head through the pump tubes below. Seems like I can get the...

Obviously the black print head needs replaced, but whats up with the cyan? Fixable or should i replace it to?

Not sure if this is the best place for this question or not. I recently switched from CS2 to CS5 awhile back (I know I'm still way behind) and my jpegs from photshop have started printing off white where it's supposed to just remain white. If i open a jpeg in Illustrator and save as an eps...

Long story short, I cant seem to get a tech in my area to replace a main board on my VP-540 for less than $1500 (and a month out at that) so I'm stuck trying to play tech. Couldnt get the Peck tool to read parameters on my old main board so I've been going through the process the hard way...

My VP-540 has been getting progressively worse about "losing connection" after starting a print. Typically it only happens within the first 5-10" of a print but occasionally happens further in to a print. Once I get it printing past that it will typically print fine until I run out of prints...

Hey all, I've had to reinstall windows and all my software and having a problem opening jpg files in Flexi8.1 now. The files are opening to a larger physical size than what they are supposed to. For example if I save a jpg in photoshop thats 20.5"wide at 150 pixels/inch and try top open it in...

I have about a dozen empty 440 roland eco sol max cartridges, is there any place that recycles or offers any kind of trade in on them? Or am I better off dumping them? Thanks.

I'm using a second hand EnduraLam/US Tech laminator. I've went through several rolls of lamination now so I think I have a decent hang of how the machine works, however I keep having an issue of the take-up reel for the lam backing taking up the backing too quickly. The problem occurs after...

Hey guys, I recently purchased a crossover cable because I kept getting the "now processing" error during printing on occasion. Had it originally connecting and running wired in through a router but decided to try crossover after reading suggestions here. I hooked it up (belkin cat5...

I recently bought a used EnduraLam cold laminator. Was wondering if anyone might be able to help me out with the tension settings. It seems no matter how I spool the lamination the laminate tends to creep up towards the discarded backing roll as I laminate. Its ok on short runs because it...