Search results

Hi it happen to me ones It was the ribbon cable the one tthat run from mother board to the Head board in top of the print head, Disconnect printer from a/c outlet ,take the five cable out. Clean the tip with alcohol, And then put it back in . It should work. Good luck

We have mimaki jfx200 , we switch from cheap Coroplast to real Coroplast brand Problems solved . We print Coroplast all day long.

The mimaki tech from PDS in Tennessee recuperate the heads Flushing all the lines . We put new set of. Ink. Calibrate , boom I’m back on business . Thanks Eric from PDS the most knowledgeable mimaki uv printer people In the USA.

We have a mimaki jfx200 just install 3 weeks ago We have problem with flaking and adhesives But happened with cheap Coroplast, We now buy Coroplast brand only. .50 cent more Per sheet 4x8. We print with mimaki LUS 150 ink ,8 to 10 boards an hours at 12 pass lamps at 100% All day long. Next...

Thank you , That is exactly what I thought, let see what happens. Let see how lucky I get.

i just bought a mimaki jfx200 uv printer that it hasn’t print for over 6 month But it is connected to power. What problems should I spect ones i turn it on? Thanks

Clear shield the product call clear shield vg they sell it by gallons it cost around $120.00 usd for a truck messure 7' 6'' x 24' you will spend almost 1\2 gallon depends the liquid laminator you use.

Sleep clean or sleep count When you set the sleep clean, the printer turn on depending on the count you set up 2,4,8,12 hours > the print heads fired little amount of ink >pump turn on suck the ink fired by the print head then the wiper go and wipe each print head > machine go back to sleep...

sleep count It's called SLEEP COUNT , you can set it to every 2 hours ,4, 8 ,12 hours clean we have our mimaki set to every 4 hours. pressingthe FUNCTION key.Press the ENTER key. SCROW DOWN INTO YOU FOUND SLEEP COUNT THEN PRESS ENTER REPLACE CNTSLEEP REF. TO 2 ,4,8 OR 12 HOURS SLEEP CLEAN.

Changing parameter Do this: when the printer boot and show the firmware version press REMOTE + FUNCION at the same time, you going to hear a beep , after that go to FUNCION And go down pressing the v key into you find parameter, some parameter you can't change they are secret number mimaki...

New for me ACTUALLY,I BOUGHT A USED MIMAKI JV3 SP FOR 1800.00 , WITH 3 NEW PRINT HEAD ONE OLD HEAD BUT IN GREAT PRINTING CONDITION PLUS I GET THE SLIDE BOARD,IO BOARD, IO2 BOARD, POWER SUPPLY ,IF BOARD , MAIN BOARD AND ALOT OTHER PARTS. CHANGE PARAMETER FROM 160SP TO 250SP AND PRINTING AGAIN...

Problem solve problem solve , Bought a new main board $1800.00 later ,bingo printing again:rock-n-roll:

NEW PROBLEM ARRIVE . AFTER I INSTALLED CSV FILE. I TRY TO GET TO #ADJUST OR TRY TO INSTALLED NEW FIRMWARE PRESSING FUNCION+ REMOTE OR < >, NOTHING COMES UP , NO BEEPS .I CHANGE KEY BOARD, NOTHING HAPPEN. HELP:banghead:

Mimaki jv3 250sp new problems YES I INSTALLED csv file and the same firmware that it had when the csv file was saved. BINGO WORKS. BUT A NEW PROBLEM ARRIVE . AFTER I INSTALLED CSV FILE. I TRY TO GET TO #ADJUST OR TRY TO INSTALLED NEW FIRMWARE PRESSING FUNCION+ REMOTE OR <> NOTHING COMES UP ...

3m price Try AVERY 1050 Ez combo vinyl and lamination Around $790.00 as good or provable better around curve,channels and complicated rivet than 3m. :design:

Test print Change the pumps, it is the only solution:rock-n-roll:

Come on , we all here trying to help each other in the most inexpensive way for solution with our own past troubles and solutions you change long cable ,slide board and main board if is necessary, changing parts like many supposedly call "technician" at customers spence it not what this forum...

2014 dooge caravan need it hi im looking for 2014 dodge caravan template only i cant read it from my dvd pro vehicle collection dvd thanks you Ed

Next ,check a little switch right under the needle the one that punch the cartridge . Press and depress couple of time see if work good luck

I have a 250 SP. It wasn't working for about two years. The lines were emptied and cleaned out completely. It's now unable to read the Black and the Magenta chips in my bulk in cartridges. I changed already the chips with a new one and I also change the receiving sensor without any results...