Search results

So I have been battling a problem with my UV Lamp system for a little over a month :banghead:. I keep getting an error that says Right UV Lamp Problem. I then did some trouble shooting. I replaced the bulbs at first because they were getting to that point anyways. This did not resolve my...

Is there anything I can do to help the Opaque White keep from dripping out of the ink head? I know its common for the white to drip when you close off the valve to do a purge to the other colors but when I leave the valve open it still drips... and I mean an excessive amount. The room is 72...

Just curious if anyone knows or has a replacement part for the Kongsberg Multi Cut Straight Blade tool. I fumbled the tool and dropped the damn thing and it bent the shaft that the blade holder attaches too... I called Esko and im wait for a call back.

I need to know how the Media Advance Correction Factor comes into play when using the Roll Media Option on the printer. I was printing on 14oz Banner and there were no white lines in between the prints or overlaps on the print. I have the Media Tension set to Low and I have the Media Advance...

Hello everyone. I'm still fairly new to the trade of wide format printing. I have been in the printing industry for a few years. This year I took a new job working with Flatbeds as apposed to the sheet fed presses. I'm just curious as to how much I should/could be making here. Location is...

Hello all, I made the post about the broken Kongsberg Mulitcut iXL. I took a couple pictures of the actual error I'm getting. At first it was an issue with the saftey system and now I'm getting the 3063 servo voltage error.

I know this will be a difficult question to answer so I will do my best to describe my issue. I have a Kongsberg MultiCut. I was routing this morning and decided to change the bit to a different size after doing so the machine just went kind of hay wire. At first I was getting the safety...

Is it possible to route out a 3/8" thick 6061 aluminum plate on this machine? I think it would be possible since you can set the machine to go through the material in steps. Just curious if anyone has tried or done this, I am going to try and make a sprocket guard for my 660 raptor on it...

Hey guys I have a question about General Formulations Laminate Concept 100 Gloss, 101 Lustre, and 102 Matte. This Vinyl laminate is supposed to have a 3 year durability to environmental exposures. I have to not used this stuff outside before and we are going to be doing a job where this...

Hey guys I did some print head maintenance on the Cyan unit to get some nozzles back in our Fuji Acuity Advance HSX2. What I did was took the cover off the gantry, removed the hoses from the Cyan reservoir and drained all the ink out. After that I blocked the return hose to the reservoir and...

Hey everyone I'm looking at making graphics for ATV/MX/Side by Sides. I have not had any experience producing something along these lines. I would like to know what type of material would work best and how thick the laminate should be. We primarily order our products from general formulations...

Hello, Im new to the world of flatbed printing i have been doing it for about 3 months and i have been learning alot. There is one issue i cant seem to tackle on the Fuji Acuity Advance HSX2. I have been having alot of problems with the print doing what everyone here refers to as banding...