Search results

Marabu Marashield UV-curable

Global Garage can help you unload it. Used Grand Format Printers and Other Used Print Equipment, Printhead Cleaning, New and Used Industrial Printer Parts, VUTEk parts

Does the output color in those spaces read 0,0,0,0 in your RIP? Need to make sure it's not a data-in issue. Does it spit the cyan when you do a nozzle pattern test print?

Brian, I just messaged you. Thanks and I look forward to hearing back.

Will AI not trace it well enough? If not, just use Vector Magic or similar.

Check your ribbon cables and connections for ink and/or scorching or poor seating. They could have been slightly dislodged in transportation and joggled loose with the printing/nozzle checks. Both going into head and control board. That's an easy troubleshoot to rule that out. Make sure printer...

Take a meter and measure resistance to see if the fuse is truly bad. You can do that with the board still in. If so, just get a cheap axial fuse and solder across the old one. I too recommend taking the board out to do the soldering.

Need more details and pics. Printer? Paper/vinyl? Ink type/brand? Etc.

500, 700, etc. So those guys provide the chips too?

What are you wanting to print on? I have experience with both. You can PM me if you want specifics.

Can you pull ink from the dampers with a syringe?

Curious as to what's out there and experiences with other inks and chip solutions.

I don't use a lot of jigs, but I get Digitalblanks when I do need one. Never had any issues with warping and we ship them to tradeshows, sampling at other sites, etc.

"End of the line" meaning from the dampers or from the bottom of the capping station with the heads capped? Are you getting air or vacuum?

Yes, i've used little butane torches. Works well.

Does anyone have a contact for an independent technical contractor for Mexico? Thanks

You need to make sure there's ink getting to the head. Pull ink from the bottom of that cap line with a syringe. If it's not getting ink that's one thing (pump, bad seal, damper seating, etc), if it's getting ink and not firing then it's likely electrical. What printer is this question about?

At the end of the day what really matters is how your actual prints look. Are they showing issues like the color strip?

The RIP that comes with the Mimaki (RasterLink) cannot be profiled without their profiling software, which I've heard is in the neighborhood of $4k. I've never done it, but it's on the docket to learn and do. If you use a RIP like Onyx with internal profiling ability, you still obviously need...

Yes, seen it happen on many inkjet printers. Filling the caps with solution and having the pumps in the "open" position will cause a siphoning effect. Seen many ruined carpets. The solution is to remove the carts or close off bulk tanks when soaking heads. Tough to 100% know when the pumps are...