• I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes. Click to Support Signs101 ...

Search results

  1. JFX200 Issue - I'm Stumped!

    Some parts of our printer is patches that I've made or modified. By purpose, no air pressure or ink delivered to the right side of the carriage. What I did today to fix the subtank/slider error was to reset some of the parameters (ink1-flt err/tnk err/spy err/rt err). Hope it will last!!!

  3. JFX200 Issue - I'm Stumped!

    Hi, Same issue here. Working with jfx1631 plus. Ink set mmccyykk nnnnnnnn On the 8 head (16 channel), having trouble with the ink level, and it's a head that not included in the ink set. Did you figure out the problem?
  4. H

    I've tried it on one of the head, no help. Anyhow, all the heads are traveling to our color...

    I've tried it on one of the head, no help. Anyhow, all the heads are traveling to our color supllier now, in hope he knows better and will open them up for us. Thank you for your knowledge, its hard to find intellegence like yours that willing to help.
    • humen2
    • Profile post comment
  5. H

    For the Acetone, (its an UV ink printer), If all my test goes well, do I need to mix it( with...

    For the Acetone, (its an UV ink printer), If all my test goes well, do I need to mix it( with buytl carbitol)?, and then flush the head? Thanks again, Shahar.
    • humen2
    • Profile post comment
  6. H

    Thanks man for the answers :) For the NMP, at first only the magenta was clogged, I've tried...

    Thanks man for the answers :) For the NMP, at first only the magenta was clogged, I've tried syringe flash the head with it, it opened it a bit but not fully (look like a big chunk is stuck in the head). To my stupidity, I've swabbed with NMP the other heads from the outside and It's clogged all...
    • humen2
    • Profile post comment

  7. JFX-1631 with compatible printhead

    Hi, Please help me. We have Mimaki JFX-1631 with Toshiba CE4 printheads, all of them are dead now ): We found out that Toshiba CE4M are about half the price compare to the CE4, and want to try and installed them in our printer. The heads look the same in spec. (a bit of Drop volume difference)...
  8. H

    Dear artbot, I hope you can help me, We had a clogged printhead on our Mimaki jfx1631 (it's a...

    Dear artbot, I hope you can help me, We had a clogged printhead on our Mimaki jfx1631 (it's a CE4 Toshiba head). I've tried some NMP flush, the NMP touched the outside of the other heads nozzles and stayed over the night, now all our heads clogged (20% of clogging) :( :( :(. Can you advise? I...
    • humen2
    • Profile post
  9.

    mimaki JFX-1631 PLUS nozzle deflection non-stable

    Thanks. I thought about playing with the voltage a bit, so I'll try that. And I'll check the temp (I didn't thought of that). I'm also gonna disassemble the flat cable from the head and do some contact cleaning over there. Regards, Shahar.
  10.

    mimaki JFX-1631 PLUS nozzle deflection non-stable

    Hi, In the last few days we have a special problem, the black printhead gave a strange nozzle test (see picture). The lines are going out straight but not at the right position (deflected), this is a known problem, but the defects are changing postions in the next test (even without cleaning...

  11. Durable dibond sign. layers? hand uv coating?

    Hi everyone, I'm stepping my first steps with Dibond signs and have some questions that are a bit hard to find in the forum archive. We are printing with Mimaki jfx1631 plus and LH140 or LF200 inks. My need is a sign that last long in direct sunlight. A. I've been reading that printing in...

  12. linear encoder scale - Generic 150 Linear Encoder Scale 5M VS. rgs20 - JFX1631 plus

    After a lot of searching and lookups, here is my resolts. Its cheaper to buy the original then to try to apply a different one. I've also found a technician that has contacts at mimaki and willing to sell me the original product at the cost of 2k$ with all the applience tools (: thats about...

  13. bertholdprinthead - is it good?

    OK, I have checked the forum and found out they are in the gray zone, I will stay with digiprint and the mimaki provider in my country. Thanks.

  14. bertholdprinthead - is it good?

    Thanks a lot!! I will listen to your advice. Does Inkmed are OK?

  15. bertholdprinthead - is it good?

    HI, Does anyone order a printhead from this supllier? The product that i would like to buy is: http://www.bertholdprinthead.com/products/Mimaki-CE4-Printhead-Assy-%252d-KX%252dCE308644CS.html They are a lot cheaper from any other supllier, so it disturbing me. Please advice. Shahar.

  16. linear encoder scale - Generic 150 Linear Encoder Scale 5M VS. rgs20 - JFX1631 plus

    Hi all. I have Mimaki jfx 1631 plus. One of my gold plated linear encoder scale (RGS20-S scale - 3510MM) is dammaged. The price of one strip is about 3000 euro. I've found out that is Generic 150 Linear Encoder Scale 5M, and he is much much cheaper. Can anyone tell me if this scale will work for...
Top