Search results

It does not clean as easily as the old material. They are super picky about everything.

I have a customer that regularly orders signs that require a printable dry erase overlay. We used to use Rtape EZ dry erase material but that has been discontinued. Does anyone have a suggestion for a printable dry erase media? We tried the clear laminate over printed vinyl but they did not...

This may be a dumb question but I have never had to do this before. We have some signs ready to go into production which are two parts: a colored PVC base fused to a white acrylic with direct print. What is the best way to mount these types of signs directly to the wall? I have seen some...

We are now getting a little bit of ink. There are no exposed cables and I don't see ink anywhere near the board so I doubt that would be a problem.

I have not checked the fuses yet (not sure where they are) but we are not getting any error messages.

I PM'd you for the service manual. Thanks for your help! I finally got in touch with someone at Sign Warehouse and they told me to start with the maintenance station as well.

When we took the maintenance station off, the tubes going into the pump were completely clogged and had come off spraying a little bit of ink around. The tubes from the station to the waste bin were fine, in fact see through. So I imagine the pump has been bad for a while. I still would like...

Not sure where the head fuses are located (new to this). The pump sounds like it is running during the cleaning cycle. However, we flushed all the lines and no ink is coming down the waste lines into the waste tray during a cleaning cycle, but I feel like there should be a build up somewhere...

Several weeks ago we had issues when one yellow line became backed up with black ink. We flushed the lines of all inks and air and replaced flushing pad and wiper while we were at it. We were able to print fine for a couple of weeks. Last week we had some more time on our hands so we checked...

A rep at Grimco just let me in on that info! Thank you

Its a Mutoh Value Jet. The rollers will hold up to 52".

I guess we need a bigger printer then. 54" will work in our printer (according to specs) but the printer head snags on the edges and causes smudging.

Has anyone had any luck sourcing 13oz gloss banner material with a width of 50"? Any suggestions or referrals would be great! Thanks!