1614

Started first week of August (2yr old print head) after hot/humid days where the Cyan (1st photo) color had missing areas, could not get it to release. Bought a new print head to try to print the second week and changed dampers - in which could not get the black to work at all (2nd picture)...

Hi there, I think this might be a common issue but I am unaware of the solution. I'm running a mutoh Valuejet 1614 with a bulk system installed and one of the subtanks isn't refilling (Black). When I try a little charge it gets stuck at 98% I've tried using "tank valve check" and one of them...

Hello all, I have flexisign 12 and Production manager that goes with it. For some reason, when I try to print things my job with RIP fine, and act as if it is about to print, but once the status goes from 99% to 100%, my job disappears from the queue. Then my printer is trying to reprint the...

Hi is it possible to rebrand (via firmware e.g.) an OCE 9160 to Valuejet 1614? Sincerely yours, Michael

Anyone ever had trouble with the Page Feed motor on a Mutoh? About a month ago I started to notice a thumping sound when advancing media through he printer. Then one day I noticed about 1 inch wide strips across the print that I could definitely see the wave pattern. These areas would show up...

$5000. New print head installed in December of 2015. We just upgraded to a new Mutoh 1624X. This machine has always been cleaned and maintained with genuine Mutoh parts. We have ONLY run genuine Mutoh inks through the entire life of this printer.

...Hi all, we run a Valuejet 1614 and a VJ1638, we converted the 1614 from Ultra Eco to UMS when we purchased the 1638. Both printers needed new heads within a year, the cyan head failing in both machines. We reverted back to Eco Ultra in the 1614 and we have no problems, however the 1638 is...

I have a mutoh 1614 and its has firmware (ver. m/c: 2.00/1.19) and I think that enabled the machine to spit in the second spittoon. Now I would not have a problem with that but it has add a lot more time to my printing. I am wondering if I can turn it off, go back to and older firmware or what...

Good morning. We go through a lot of vinyl here, and sometimes only for a small print. With that said, I end up cutting off perfectly good pieces that I try to save as salvageable scrap material. When I try to use it to print other small samples on, the printer basically tells me that there's...

I would like to buy a VJ1614 if anyone knows where I can buy one let me know. I am located in Southern California.

Has anyone ever come across instructions for replacing the maintenance station on a 64" ValueJet 1614? Or even the capping station? I've looked pretty hard. I know I'll need to replace it at some point, but I'd like to at least remove it and clean it as some ink has spilled down below and I...

We recycle OEM Valuejet 1614 cartridges and Valuejet 1618 1-liter ink bags. We pay up to $5 / each. More info: support@solventcartridges.com Phone: 1-905-820-8833