acuity

For context, we use a Fuji Acuity Prime 20 printer with UV inks on white ACB (CMYK only), together with PrintFactory RIP software. I have no formal education in printing, though I did follow a couple color calibration courses from our printer supplier. A problem we've had for a long time is...

Caldera have a new version out, V14. We are still using V11 and while it's working ok (mostly, aside from the odd crash) they will no longer offer technical support. The upgrade to V14 is crazy expensive through our service agent so we are considering either sticking with V11 for as long as we...

hi All, im hoping someone can help or advise. we have had a couple of engineers out and still have the same issue. one of the cyan heads has been replaced so we know it isn't that. i have attached a few images of some 100% cyan tests ive recently ran on the flatbed and the RMO. i have also...

Hey Everybody! We've started doing more direct printing in our shop on a Fuji Acuity with KI inks (we upgraded from KO inks to try and solve issues with dark ink coverage chipping out on Foam Board - lets say 300% plus). We use a knife system with a drag knife to finish cutting out foam board...

Does IPA provide better adhesion when printing on glass or any other substrate ?

hello all, We have just bought the acuity advance select. We are printing on wooden veneer sheets. The print quality is good but the only problem is that the wooden veneer gets bent after the printing is done. Need few suggestions to avoid the bend.

Hello All - I'm trying to direct print onto 4MM white corrugated plastic (correx/corroplast/etc.) with a FujiFilm Acuity X flatbed, however when printing onto the corroplast we see several surface flaws and fingerprints around the edges of the substrate. We ordered a fresh pallet of material...

We are receiving this new printer (Fujifilm Acuity Advance HS) in a few weeks and could use a copy of the manual in advance to guarantee a smooth transition. I have called and e-mailed fuji but no luck yet. I have also scoured google to no avail Any help is very much appreciated.

Hello I am wondering if any other owners of this machine have any any similar issues with the Z-Axis failing quite regularly. After many service visits we have not been able to get down to the root of the issue after replacing controllers and the motors themselves. Fuji states the have not...

sure we discussed color acuity back here. but how good are you at visual/geometric relations? the eyeballing game my score Overall score: 7.32 Total time: 130.16 maybe the :bushmill: doesn't help me with alignment like it does with color