arizona

Hi guys, I want to ask if sparepart between those two printers are the same? I have Fujifilm Acuity EY and my fuji rep charged me 7000usd for each printhead. I am just wondering if the price is reasonable or not. This is the part number FCE3010108132 KIT-F/S PRINTHEAD CA4 If you sell one of...

I am looking into the Arizona Oce 460GT flatbed printer and wanted to know what these are going for in a used, fairly good quality condition? Does anyone know what the value of this printer is going for since it is from like 2013?

Hi all, Would really appreciate some help. Everytime I try to print a white layer I get banding until about 1/4 of the way down the print and then both heads slowly fade out as the print continues. I have flushed the white ink through and have had an engineer out several times who cannot seem...

Looking for advice to identify what's causing this. I'm periodically getting strange vertical patterns on printouts, mostly noticeable in gradients on Alu-dibond. Problem comes and goes. More common with certain profiles but not exclusive to any one. Tried changing various Caldera RIP...

Technician came to level my printbed. We'd removed the magnetic table top and he spent the better part of a day tweaking the table and measuring with a dial indicator. I went to print the next day and had two adjacent nozzles out on black that cannot be cleared. Technician came and then found...

Full-time Bindery Supervisor Needed at NAU (Flagstaff, AZ) compensation: Commensurate with experience. employment type: full-time Northern Arizona University seeks an experienced print supervisor to provide support to the print production needs for the University. Reporting to Printing...

Greetings everyone, We decided to make the changeover from IJC256 to IJC257. The Application Bulletin here seems to indicate that we don't need to perform the "short flush," which is a process managed by the printer. Instead, my understanding is that it just needs to have a "manual...

I am having issues with a file that was created in InDesign and exported as a PDF 1.4 (see attached pics). The background is a blue gradient that fades from dark to light blue. The gradient was generated in InDesign. No matter how I save the file I am getting the same hard line in the gradient...

Canon/Oce offers a pay per SF plan as an option vs purchasing the printer. The pay per use plan over 5 years, ends up being quite a bit more than purchasing the printer and consumables, however it gives you the peace of mind that the heads are covered under this plan. If you have a Canon Oce...

Hey All, I'm moving our Arizona 318GL from New Hampshire to New York. The owner refuses to pay Canon to rent a crate or to shut it down and re-install it. So I'm stuck trying to figure it out. We have a rigging company doing the actual move, but my concern is more with the ink and the print...

We've had an Oce Arizona 360XT for about 4 years now and it's really been nothing but problems. Lamps heating up material, white ink banding, neutral gray banding, outrageously expensive parts, expensive lamps, expensive ink heads, utterly poor service from Oce, etc. etc. etc. Oce and the local...

Hey Guys, We have an Arizona 480GT with IJC258 ink set. While printing using the roll function, we are having some major issues with banding. Seems to be way better and not very noticeable when printing the same image on the flatbed. Head tests are all perfect before and after I stop the print...

We are looking to buy a used flatbed printer Currently we are interested only in Arizona GT's and X-Series X500 but if there are reasonable offers for similar printers i.e Agfa Anapurna M2050 or EFI Vultec t1000 we will listen to it If you have some information contact me here or directly on my...

Thanks a lot for the opportunity of such a forum. I finally decided to register in order to interact and contribute with other members. As a quick (and non-exhaustive) introduction, my name is Aurel and I've been involved in the vehicle vinyl wrapping industry for about 5 years. My main...

Hi group I hope I dont break any rules on my first post, by asking for a distributor. I am based in México city, México, and bought an Océ Arizona 318 machine, wich was installed the fist week of January, and has been idle most of the time, first because Oce did not have inks in stock, and now...

I just wanted to say thank you for having this forum. Last night while working on a project I was having some cutting issues and today thanks to the helpful information that fixed my problem I'm having a great day!! Signs101 :U Rock: I've been in the sign business for many years and even with...

Hello All, this is my first Thread in this awesome family. I'm posting this because me and my business partners are faced with a decision and I want to get other people opinions to use as a bearing for my part of the decision. We have been approached by a few non-wide format shops to sub out...