#cjv150

Hey guys, I have bought a cjv150 with a broken epl2 Board so i bought a new one. It came with epl3 start up fw 1.06 which i upgraded to the newest 1.2. After that i upgraded to the cjv300/cjv150 fw. 4.4 what worked. The machine started as cjv300 and Shows a lot of errors because of thinking...

I've got a CJV150-130 does anyone have instructions on to how to go about chaning the cables in the trailing arm ? i need to change my cables since they are bad.

I was printing stickers and they came out perfect and the right shade of gray. A couple of days later I printed out bigger ones, but the shade of gray got a pinkish tint making it look brown. Also, added blue specs to white areas that should have that. I use mimaki cjv150-130 and rasterlink 6

Hello, I have a Mimaki CJV 150 - 130 that I'm using as a hybrid for printing and cutting. When I do small prints and cuts it works fine but I am working on vinyl that is 5' long and 12' wide and when I do that it doesn't cut in the right spot. As you can see in the picture. I was wondering how I...

one cyan section has gone completely, done several cleans, custody wash and a ink fill up nothing so far. What else can I do or what could cause the problem

Hello everyone, I really need some help on this as I feel like I'm almost there with this. So I have a Mimaki CJV150 downstairs. My main powerful computer is upstairs. I just want to know is there a way for me to rip and print using my upstairs computer to the machine, simple as that. I have...

I have a Mimaki CJV150-130 from which the USB port has burned. Now I only have the port via LAN, but I can't make the softwer recognize this port. Is there any way to print on this machine via lan?

Hi guys. So I had my Mimaki CJV150-75 for nearly a month now. At the time the tech guy told me that I only need 4 Cartridges (CMYK) to run in dual CMYK setup. At the moment I only have 4 cartridges in and the nozzle tests do show a dual CMYK print. The tech guy said putting in 2 of each colour...

Apparently there isn't a way to nest print and cut jobs with Rasterlink 6 :( I mean this is such a simple function that I use all the time with Versaworks. Is this true or is there a way round it? Basically I need to have several different eps files on a single row to save media. There is only a...

Using Rasterlink6 and printing with a Mimaki CJV150-130. We are printing stickers with two cuts, a half-cut square around a kiss cut image. The order we want it to cut is the kiss cut first, then the half-cut. Using the Mimaki Fine Cut tools in Illustrator we designate the kiss cut path...

I'm trying to print on a CJV150-130 and I was curious if Rasterlink6 has a feature like Roland's Versa Dual/Versa Works where you can set it to cut the image boundaries? I have been struggling to find something that would just cut out around the edges of the map I am trying to print. Is the only...