cutter problems

I've been using my Graphtec FC9000 for a few months with zero issues, recently I have been getting a few off cuts. Software: Onyx Thrive and Cut Server (Up to date) Blade: CB09UB-2 Printer: Epson R5070 Crop Marks: Inward facing L's Here is my list of problems: -Kiss cut likes to switch spots...

Hi! Bought this cutter month ago. Works just fine. But recently I noticed, that after job is done, there is one cut that is looks like some kind of plotter defect. I do lettering jobs. I tried different files, sizes and dimensions. Cutter always leave this "mark" on 1 object. Can please someone...

I have an HP latex 54 cutter that I use with Onyx thrive 18.5 I did a reinstall in the software last week and now my OPOS will not read the registration marks. It will begin to read the barcode and look for the registration marks. It then goes .25 inches to the left and goes in circles looking...

Hello guys, I have a problem with the Mimaki CG 130-SRIII cutting plotter. I cut approximately 1 meter long sheet of vinyl foil. At the beginning, the cuts are accurate, but the further the foil moves forward, the cut seems to deviate downwards (I attach a photo). Has anyone had a similar...

My saga continues, A continuation of a former post of mine. Airmark installed a new mother board and a pressure head on my new cutter as it miscut at their shop. I am cutting Substance vinyl/laminate on A Summa S2T140 and as I cut through my sheets, my cuts slowly go off calibration as the...

I printed some decals that I want to contour cut. My Graphtec is reading all the registration marks, then starting to cut, but the cut is off. I stopped the machine, and pressed the cancel job button. When it "Canceled" it starting cutting a diagonal line from the place I had stopped it all...

Kind of in a bind as I have a bunch of jobs lined up and can't figure out what is going on. I have a PNC-1000 setup using parallel port on Windows XP using CorelDraw 9. Whenever I was cutting, I would make sure to convert to curves and set the outline to 0.01mm in Corel. Everything was...

I bought a Graphtec F2100-60A back in 1994 or 95 and it has never failed me but the problem was the Flexi software I had would not work with anything past Window's 98 so I wanted a newer version. I am not computer savy so I'm sure that my problem is my ignorance so let's get that out of the way...

Does anyone know how to calibrate this machine? The operation manual does not state how and no where that I have searched and searched on the internet says how. When trying to cut out circle decals, with registration marks the computer printed out, the machine seems to cut dead on for the first...

We have a Mutoh ValueJet 1204 printer and a Vinyl Express Q54 cutter. We do a lot of contour cutting, but have a heck of a time lining my vinyl up in the cutter to get it to cut where it needs to. Any tips or tricks that you use to do this well?? Seems borderline ridiculous to me that this is...