installation help

Hi everyone! Newbie to installs and looking for advice on drywall installing I have 8 letters in 1/2 inch acrylic about 7 inch high. Mounting them to an interior drywall wall which will have a moss wall feature. The letters need spacers as it needs to be 1.5 in - 2.5 in from the wall to either...

We are adding an 18" high frosted vinyl 'privacy strip' along some glass panels. These are floor to ceiling glass panels: 2 straight, 2 turned 45 degrees and the others, straight. [photo attached] The silicone is optically clear and on either side of the 45 degree glass, the silicone is just a...

Hello, The company I work for is small and I am relatively new here. The previous company I worked for did not do vehicle wraps but I did sometimes apply cut vinyl graphics to vehicles. My "New" company provides wraps and since I am the only employee I have had no one to train or teach me the...

This is my first post on a forum so please bare with me; I've just taken over the family business and I'm having a lot of trouble planning (and pricing) this job: My client wants a 38"x66" directory sign to be installed between two stone pillars. It's replacing a light box that's installed...

I have a customer who wants me to install 7. 6' X 100' mesh banners at a construction site on an existing fence using zip ties. I haven't done this before. He wants a firm quote. My my question is what may be the estimated time in doing this be and possibly a reasonable cost for this using...

I ordered a roll of the Avery Sparkle Film and it looks great! Only one hang-up...I cut out a 5' section of a pattern to apply to a window and the film will not stick to the High Tack mask I put on. How in the world am I supposed to apply this stuff for large applications if it isn't sticking to...

Hey guys, So I have a customer who would like us to lay down vinyl to cover an existing dance floor 24' x 24'!!! Does anyone know of an over sized floor squeegee designed for something like this, or any other ideas on how to easily do this would be greatly appreciated!!!

Hi Guys, this is my first post and I am desperate! I just bought a GCC Expert Pro, I installed it and everything seems fine, but when I export to GreatCut and try to cut vinyl, the vinyl moves back and forth in the rollers and the head moves around, but that's it. It seems to me like it is...