• I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes. Click to Support Signs101 ...

magnet

  1.

    Apply magnetic sheet or vinyl to back of 2-3mm PVC

    I am cutting out CNC letters that will be installed on 3mm pvc. I plan to print a background layer that has a light version of where the letters go. The letters will be cut out of 3mm PVC and I will apply magnets to the back. I want to find an easy way to install the letters on show site for the...

  2. Printing Magnetic Roll on Seiko 104S

    For the last 15 years we've always printed our magnets on our flatbeds by cutting the needed sheet size from roll magnetic up 120" and laying those down on the flatbed and printing. This works great because we usually only print 2-8 12x24s at a time. I have a job for 50' of magnet (100ea 12x12)...

  3. Cut plotting on printable magnet

    Looking for some help. I have a customer looking for 3x2 magnets with clipped corners. I have a HP315 and cutter bundle. I am wondering if my cutter can cut the Diggimaxx after I print on it. If anyone currently does this, what type of knife pressure are you using. Thanks for the help ahead of time.

  4. Magnets for Aluminum Body Vehicles

    Hey guys, Does anyone know of a material that can be used on the new Ford F-150s? We had a huge order of magnets that we sent out and turns out, all their vehicles had an aluminum body.. *facepalm* They want something that has the same properties of a magnet. They want to be able to take the...

  5. Need Help Magnetic Signs on HP Latex 570

    Hello all, I need some advice on how to go about printing on Magnum Magnetics 0.20 standard magnetic material. I've spoken to at least 4 different HP Dealers who for the most part have told me that HP + Magnetics = not so good. One dealer did tell me that he was able to do this and has a...

  6. Rounded corners on magnets

    Is there a good way to cut rounded corners in magnet material without buying a Lasso corner rounder. $180 is not a bad investment but I need to make these right away. Thanks

  7. All About Magnets

    Do you print directly to magnets with your inkjet? It looks like it can be done but others on the forum talk about printing to a vinyl then applying it. Is a higher number of poles per inch stronger or weaker magnets? I'm struggling to find a clear answer. Have you every attempted to cut it...

  8. printing in magnet sc-545ex

    Hi, does anybody has experience on printing in magnet using Roland soljet pro ii v, any suggestions it's my first time to use magnet for ads. thanks
Top