mesh

We have an EFI 32r+ and have a big issue with materials wrinkling up in the center. It's done it with 13oz scrim, 18oz double sided scrim, mesh and no matter what I do it still does it after about 15' of printing on any roll I put on it no matter how good the initial tension is. The machine is...

Hey All, We are not new to the industry (est. 1999), but we are new to the forum. Just wanting to say hello and give a brief intro to our wholesale services. We have 196" wide seamless capabilities. Our fleet includes (2) 16 ft. wide printers, (1) 10.5 wide printer, and (2) 5 ft. wide printers...

Looking for experienced installers for vehicle wraps, and environmental graphics. contact hr@azprogroup.com

I have a Mutoh VJ1324. Is it possible to make a mesh type decal that goes on a back windshield with that printer. What type of material do you use for that type of decal? Thanks

Hi, I have a question about mesh banner. If I hang it inside of shop window, is it working same way as pert. vinyl? My client want to send graphic printing(fairly big size 44"x72") to their customer. They wanted perf. vinyl but I suggested them it would be very hard for their out of state...

I have a customer who has had vinyl banners about 15' x 4' installed by driving 3 of those green metal stakes into the ground and attaching with cord through grommets. They put these out in a place that gets quite a bit of wind, and the banners are torn apart within a few weeks. They are...

Hello, I was wondering if it were possible to print on mesh with a flatbed? Thinking it can't be done well, but thought I'd ask. Thanks

Making and installing a 24' wide by 54' tall mesh banner. Was planning on drilling holes and installing that way but customer just told us we cannot drill into building. LOTS of windows to use --- anyone ever trusted suction cups to hang something so big? Was thinking about a lot of these...

We do large indoor mesh banners every couple of years (22'x26' and 15'x25') but I have had a hell of a time with seaming the panels. We have tried: Hem tape Mega tape Heat Weld Does anyone have a good practice for seaming the panels that actually works? They take these banners up and down...