oce arizona

I had to replace the HD of a 2260 GT, I took a new HD and dumped a backup I had created from that same hard drive. The restore worked, I was able to boot the Oce 2260 and restored the last registry and the machine prints perfectly. What is the problem? I can't reconnect to the RIP. It always...

Hey, everybody! I have a problem with OCE Arizona 550XT printer. When printing, the carriage moves to the start position and does not have time to stop. This causes it to hit the stopper. This is shown in the video. On flatbet this problem is always present. On roll the problem looks a...

Hi all! I hope I'm posting on the right board here. I'm in need of some help. My Oce Arizona 350GT is making a funky noise. It goes slow and then speeds up... Any idea as to what it is? It's coming from the voltage area just off of the ground. It sounds like a fan wing is hitting something...

Hi y'all, we're looking into a 4x8 flatbed machine and we are really liking the Oce Arizona series. We're looking at either the 165GT or the 365GT models. I'm wondering if anyone can give me a quick understanding of the differences between the two machines.. i'm looking at the specs online, and...

Hey all, Today I did my morning maintenance of purging and vacuuming the print heads, nothing out of the ordinary. Then when I went to do the nozzle check the first time, I hit print, everything was running normally, numbers looked fine, and then suddenly the print stopped while it was laying...

I have an Oce 318 that starts printing a dark blue color fine and then after about 5 inches just starts to get worse. Any sugestions on how to fix? Filters look good.

Hello everyone, need help, i was running my Arizona 460 GT on IJC258 ink, when i was starting use IJC257, in registry i changed ink type, but ink temperature and i thing voltages also changed automatically. can anyone is running Arizona 460, can you send me registry file, or tell me what is...

The print shop I work at uses the Roll Media Option on the Arizona 1360 UV flatbed to print banners. So here's the latest problem. If you have this machine then you know how tricky/annoying it is with the foot pedal controls for the roll media load/unload process. If you press one of the two...

Hello everyone, i need good working media profiles for my Oce Arizona 460 GT, i'm using IJC257 inks, Onyx 12, i downloaded some media profiles from graphiplaza.cpp.canon, but whey are using too much ink and i don't like color matching, ink configuration is CMYK +white+varnish. please help me, my...

Hey everyone, One of the reasons I'm writing this posting is because I don't want anybody in the sign industry to have the same problem as me. I have been a Canon/Oce customer for the past 8 years, having 2 previous printers with minor issues, until about 4 months ago, we replaced one the...

We purchased an HP FB550 in December of 2018, so it is just over 2 years old. It has been a bit of a lemon. We have had thermistor issues, encoder strip issues, but the final straw was an ACM headstrike we had last week. It was our fault (damaged leading edge on ACM) and it lead to the head...

Hey y'all, Looking for info on the Canon Oce Arizona 460 - if you are using it, do you love it? hate it? any tips, tricks, concerns, etc? Also looking for a base price point on the Arizona 460 - we are looking at a few different machines, just got some budget approval, so i'm trying to...

Hello, I have a question about printheads for Océ Arizona 550GT. Head manufacturer is Toshiba, which offers only Toshibatec CE2. I bought this head - it's not installed yet https://www.digiprint-supplies.com/en/arizona-550-460-print-head-assembly.html?category= But it came with the CE4M mark...

hi All, im hoping someone can help or advise. we have had a couple of engineers out and still have the same issue. one of the cyan heads has been replaced so we know it isn't that. i have attached a few images of some 100% cyan tests ive recently ran on the flatbed and the RMO. i have also...

Hi, I'm considering to buy a flatbed (used) to upgrade our old Chinese APEX. Customers are becoming more and more demanding on quality and with an old machine can't keep up anymore. I'm between the Océ Arizona 365GT and Afga Anapurna M2540 FB Price is more or less the same. both, I have to...

Hi group, after 3 years with an Oce arizona 660xt I want to share a little bit about my experience with Oce Arizona printers, we currently have over 600,000 SF printed and about 5 print head change, print head damage for head crash is very easy operator need a eye and concentration always to...

Hi All, We are having some issues with out Arizona 350GT where the White heads keep dripping, we have checked the .45 micron filters and they seem to be clear of ink and we have also swapped out the Ink level sensor with no luck. Has anyone else had a problem like this and how did you resolve...

Can anyone share specifically what color profile you are using on your OCE 460 using 256 ink? We are printing primarily on Acrylic

I have been having a lot of problems with some of the print heads on my Oce Arizona 250GT. Most recently with a major plug in two of the heads. I have performed all of the standard cleaning and maintenance multiple times. I guess my question is when/how do you know if a print head needs to be...

Has anyone tried printing hologram vinyl on a UV flatbed? Specifically an Oce Arizona?