onyx

Our company just upgraded to Onyx Thrive and we got a new Zund about a year ago that uses Zund Cut Center, we use two seperate computers for Onyx and Zund. So far I have been able to have Onyx print a file that was set up with cutlines, then print with a QR code and registration dots, the only...

Whenever I put grommets on a banner in onyx 21.1, they aren't spread across the whole banner and instead are put on maybe half of the banner and there will be grommet marks in the middle of the art. (Ruining the banner). They don't appear in the preview and are spaced 24" top/bottom/ sides...

Morning All, I need some help with my print software for the Epson Sure Color S40600 we use Onyx Postershop but my layout tool isnt working properly where the preview isnt showing up. I have tried multiple files and different resolutions. I have attached some images to show what it is doing. I...

Hi all; I'm having an overlap issue on my Canon Colorado M5W machine at the office. Example, today I do a test print of 3 tiles for my 110cm wide media. My order is w 315 h 260 cm and I divided each panel into 104cm under the onyx Tile tab. My overlap margin is 10mm. I used a 2px cutting...

I've been using my Graphtec FC9000 for a few months with zero issues, recently I have been getting a few off cuts. Software: Onyx Thrive and Cut Server (Up to date) Blade: CB09UB-2 Printer: Epson R5070 Crop Marks: Inward facing L's Here is my list of problems: -Kiss cut likes to switch spots...

Hi Guys Trying to get my head around colour / profiling, etc I should know more, with 5x Latex machines, but it used to go on around me, as opposed to with me, historically. Linearise / Calibrate Is this independent of the media / ICC ? When you calibrate or linearize a Printer, is this just...

Hello, I am trying an ONYX Thrive Trial, *which completely bricked my access to Onyx Gamaprint btw* and I am trying to set up my Barcode workflow to Utilize XY2. Backstory, I am going through options on trying to fix an accuracy problem, and my next path is trying to utilize the XY2 workflow...

Hi Guys Hope you can give a little advice please. We should know more about printing that we do, but are pretty one dimensional, printing just canvas, across 5 Latex 315 machines And have done for years Our issue is that we really struggle to get consistent colours across the 5 machines. In...

I’ve always used Flexi. I’d like to get some options if I should switch to Onyx and why. I’ve heard it’s the better rip but I don’t know why. I’ve tried the trial version a couple times and it doesn’t seem much different or easier to use.

We use Onyx PosterShop to run 4 printers and we want to add a plotter to Onyx. (We use the Mimaki FineCut Illustrator plug-in to run our current Mimaki plotter and you can't add a second plotter to this software). So, we installed another Mimaki plotter in Onyx PosterShop yesterday. After...

We have 2 Mimaki plotters. One is a CG-130FX and the other is a CG-160FXII. We currently run only the CG-160FXII and we use the Mimaki FineCut plug-in with our Adobe Illustrator subscription. We want to use the CG-130FX plotter at the same time, so we can cut two jobs simultaneously. We...

Anyone have issues printing tile map in Onxy 22? I can't seem to get them to generate either thru Job Editor or from within Thrive. Running 22.5 on Windblows 11Pro, I'm wondering if it's a windows protection thing? Correct folder is selected to write to, says it writes the file (almost...

Hey y’all! I’m looking at rebuilding the color profiles for Epson sure color printer through the Onyx software. I’m just looking for helpful hints and tips. I know how to do it, but these are killing me and I have a million questions. Have any of y’all done them? Or used Epson with Onyx...

I have a large wall graphic that I've printed using Onyx's tiling feature. I started cutting it on my Graphtec FC9000 and the first panel cut perfectly. However, when I went to start cutting the second panel, the cuts were shifted to the right by about 1/4". I checked my arm alignment on the...

I'm having an issue with Onyx creating unwanted lines in my cut files. I've spoken with Onyx and they said it's a known bug that just happens sometimes if a cut line extends past the artboard when it's created in illustrator. Due to the complexity and size of this job and the number of times I'm...

So one of our biggest clients has this dot pattern that gets put onto the windows at all their locations. Every dot gets cut out individually. One location can have 20+ feet of dots that go onto 8'-10' high windows. I'm trying to find a way to create weeding lines for this behemoth. This is...

Hey guys Long story short; during the moving I lost the onyx 12 usb with the rip, I've found the key and I managed to download the rip, but I don't have the print installation file for HP latex 570, does anyone in here have it and would like to share it with me? I really don't want to buy...

I have a copy of Onyx Thrive 19 221 I no longer need. What is a reasonable price to ask for this? I can't seem to find any consistent answer to this question.

Greetings all. We've recently added flat bed cutting permissions to Onyx to give us the ability to tile long mural runs and cut on our Colex Sharpcut. Works exactly as we had hoped. My question is the Onyx barcode and what we need in order to scan at our Colex and automate our process even...

Hi guys i have Onyx thrive 19 i print wallpapers and print them as separate files in the tiling option because it just work better for my workflow. now the problem is that the label will always print on the bottom of the sheet and when i manually flip the panels for better colors matching the...