onyx

I am trying to get my Kiss cuts to cut before my CutContour cuts in Onyx using the Summa barcode server. I do tons of CutContour cuts out of Onyx with the barcode and my Summa S2T with great success, but just can't seem to set things up so that Kiss cuts cut before them. They are properly named...

Just ran into an application that will be repeating, where we need some help: tiling large graphics in Onyx and pairing with our Colex flatbed cutter. In the attached graphic Onyx split up this file into panels with overlap. We trimmed manually and the installer overlapped. We're started to get...

I've been struggling to get a profile that I really like, and I have a couple questions. I created a profile in i1 Profiler and the initial profile looks ok, although I feel like the gamut should be bigger than it is. I compared to profiles created for me on my s30670, and the profile from the...

I'm trying to set up a second Graphtec FC9000 with Onyx. I want one Graphtec to only do the Kiss-cuts, and the other one to only do Thru-cuts. In the RIP-Queue I can duplicate the original FC9000 and give it a different name and have different Quick Sets assign the cutter that I want to use for...

Hello sending my tiles as separate jobs in Onyx 19 but it doesn't rotate automatically anymore when i do that. Is there a way to do this without me manually rotating each one of them myself?

I use a Scitex FB750 with Onyx rip software. I'm trying to figure out how to underflood only a portion of an image. I've attached a screenshot of the file I'm trying to accomplish this with. The portion outlined in red has a solid spot color behind it. I need that to underflood, but I need the...

Hello got the Phototex opas for the Epson s60600 with Onyx but cant find the profiles anywhere searched the forum and read some people did download but cant find it on their site nor the epson or onyx site. anyone know where i can find or share https://phototexgroup.com/profiling/ Thank you

Hello printing wall panels in Onyx job editor with labels On so i know which panel is which and have the flip every other tile feature on it print the label on the wrong side is there a way to fix this?

Hello using Onyx to print my wall murals in the job editor is there a setting to also print which panel is which. like Insetting a number at the bottom of the print so that i don't have to manually trying to figure out in which order it goes. Thanks.

HY, we just got a 80600 from EPSON in a 9 color mode using onyx but we can't get a good ICC to print bright and full colors, i mean that we have tried some 9 colors icc and get then a good red, green, bright orange but we can't get a good dark blue or deep blue for example and on the other hand...

I'm having a unique issue that I can't find much help with. I'm using the Onyx PosterShop and Cut Server that came with my Epson printer and my cutter is a Graphtec 8600-130. Everything works perfect when I print and contour cut large spot graphics (40" wide or larger) but when I try to cut...

Hello, just recently switched from VersaWorks to Onyx in the last week, it's been relatively painless and just a bit of learning to get used to. Using the Media Manager I've been able to make my own profiles with an i1pro that look pretty darn good. The only issue that I just can't figure out is...

Note: This is my first post (I was recommended this forum by someone on Facebook) I have been using RasterLink for several years with our Mimaki CJV150 printers but have found myself frustrated with arbitrary file/job limits in RasterLink so I am looking into another RIP software. The crowd...

Hey folks, I have an unusual problem both I cannot diagnose and neither can our IT guy. We have installed Onyx Thrive RIP on both a local PC here at my office, as well as a virtual PC that is located off-site at our corporate office, but which I can access remotely and control. Our one z6810 is...

Hi , i have a problem with Onyx 10 Color Management and Color Profiles , I mention that for print I use Avery MPI 2800 media , the printer is a Mutoh ValueJet 1304 and the graphics program is Corel Draw X7. The problem is that after I work the file in corel, I save it psd type to prepare it...

I've been trying to make a new profile for the Epson S60600 but every attempt has been very heavy. I've tried adjusting the ink limits but that doesn't seem to change anything. The Onyx website is just about useless when trying to troubleshoot profile issues. I'm hoping someone can shed some...

Hi I have a roland sj-640 ex and I can't seem to get black working to it full potential, I've done a full manual clean, all the cleans in the settings, changed all of the cap tops, and ran a heap of test prints where I found black yellow and cyan all need work to get them to 100% What should I...

Hey guys I need a bit of help trying to get my printer to print without a rip or a software that's cheap I have a roland sj-640 ex and I'm using Onyx21 Ripcenter I had the license key sent from onyx America And they didn't take into account that I have an sj-640 So now that I spent $1800 on...

Hi, we have recently upgraded printer and software, I'm looking at recouping some cost by selling on the previous Onyx licence dongle/key (the software cds/box are long gone however, but i believe its all available to download online) - do we need to de-register the key first, does anyone have...

Caldera have a new version out, V14. We are still using V11 and while it's working ok (mostly, aside from the odd crash) they will no longer offer technical support. The upgrade to V14 is crazy expensive through our service agent so we are considering either sticking with V11 for as long as we...