• I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes. Click to Support Signs101 ...

sp540v

  1. For Sale Roland SP540v Wide Format Printer

    I need to sell a Roland SP540v Wide Format Printer. It is still in good working condition. It operates on Roland VersaWorks. It has been well-maintained, cleaned regularly and used regularly. It has only ever had service or work done by certified Roland technicians. It was in operation as...
  2. Problem with new cutting blade sp-540v

    Hello! A few days ago I changed my cuter blade, and i noticed that it makes a loud noise when cutting. It doesn't cut through in some places, and i can see that it was cut like this on some - - - - - - - - (if you understand). The cutting blade is from the same package that it came from...
  3. Roland SP540V For Sale

    For Sale Roland Sp540V. Purchased in 2007. Still running very well, see enclosed photos, I have a short video of it running just ask and I can forward, can't see how to attach here. Email ask additional questions, located in the Orlando, FL area. $3k or best offer with in reason.
  4. Roland SP-540V - Shows up as SP-??? - Firmware Reset?

    We have a Roland SP-540V and after a power outage, it won't POST. When powering on from the front panel, the display lights up but shows "SP-???" instead of showing the model number - then shortly after ERROR 0101. From the computer, using the InterCon-Net Tool, it also shows the model number...
  5. Eco sol max, max2 or max3 in sp540v?

    what color is best for my Roland sp540v? Eco sol max, Eco sol max2 or Eco sol max3?
  6. Question SP540V cutting not exact

    Hi guys I am new to the sign making world and to print and cut machines. Getting on well so far learning myself as I go. So noticed after doing quite a few print, laminate and cut stickers that there is always a part of the sheet where the knife hasn't cut through properly, you notice when...
  7. Need Help Roland SP-540v connection to computer

    Hi All, I hope someone can help me figure this out. I've owned this machine for a month and have yet to print anything! What I'm trying to work out is how to connect my SP-540v to my computer and have it be recognized in Versaworks. This particular unit has black plastics, as opposed to every...
  8. SP540V Roland Substance Media

    Hey All, was wondering if you could help me. I use substance media for printing vehicle graphics for motocross decals jet skis etc, they have a profile for the sp540i but not the V so I just use a generics Callander self adhesive profile but I’m getting to the point now it puts down too much...
  9. Printing Help SP540V

    Hello everyone, I hope you can help me. I have an older style Rolland SP540V (network cable type) we make mainly stickers on it. Of late our black test prints are coming out a bit dodgy like the photo. I’ve done a lot of research and there seems to be so many different causes. I’ve also...
  10. Discussion Large dampers for SP540V?

    Has anyone here replaced their small dampers on an SP540 with large dampers? I remember having a tech out many years ago and he mentioned he can change the small dampers to the large ones. The only added benefit is the ink at hand. The metal plate fixed above the dampers will obviously be...
  11. Roland SP-540V For Sale/Trade

    We have a used Roland printer/cutter. It has been a great workhorse over the years. It’s by no means perfect, however it still prints well and is a good starter printer for a shop, or a backup printer for banners, decals, etc... Priced to sell. This pic isn’t the actual printer, but it’s the...
  12. Suggestions DigiPrint eMax Inks Experience?

    Hey guys, Just picked up a Sp540V I’m bringing back to life and im curious if anyone has used the eMax inks fron DigiPrint Supplies. They say they’re completely compatible with the Roland EcoSol Max and performance is even better than the Roland in some areas. Heres a link to the datasheet...
  13. Question SP540v How do you turn on High Speed?

    Hi everyone, Quick question. How do you turn on high speed with the SP540v? I have set the printing width so that the print head doesn't go all the way to the edge on smaller media which saves a lot of time. But I saw a video last night where the printer displayed the text "high speed" I...
  14. Need Help Roland SP540V Vertical Banding?

    Hello everyone, I have recently purchased a used Roland SP540V. This is the first print and cut printer that I have used coming from a cheap chinese vinyl cutter/plotter. I haven't yet manually cleaned the printheads and printer itself yet but have ran a few powerful clean tests. The nozzle...
  15. Need Help sp540v blowing yellow magenta fuse

    Hallo, i'm writing from Italy and i hope you can help me. i'm looking for capacitors near f1 f2 fuses in sp540v main board, where can i buy it? main board blowing fuse always and cables are ok. I replaced black cyan head with no problems and it's printing well. thank you... P.S: sorry for my...
  16. SP540v Stops printing midway, "processing"

    Have had this issue several times earlier this week. Running some moderately long wrap prints, about 45 min on fast quality. Job gets about 3/4 of the way done and then printer beeps and the print head stops halfway across the platen. Display just shows "PROCESSING." Job drops off of VersaWorks...
  17. VERSAWORKS or MACHINE ..Tec says Software Issue but I can't get through...

    I have a Problem , attached you will find Pictures of the Issue, I use the ROLAND SP-540V and VersaWorks 4.4.0, on a regular Test Print from the Machine seems to be everything fine (see Picture TestPrint_16-04-2015) When I send a colored Picture Print everything what should be blue comes out in...
  18. Roland SP-540V Shutting off by itself

    I need to know why is it that my printer ROLAND SP-540V is shutting off by itself while is printing,... It printed a 20"x60" decal. Then a 12"x48" ... after that I started with the same piece and it stopped at 5". It shut off by itself. I turned it on and it printed 2". Then for the third time...
  19. roland sp540v contour cutting problem.... so frustrated HELP PLEASE!!!

    I have an sp540v and its a great printer, but yesterday I was contour cutting some decals and everything was going great until.., I pulled the media off the printer to weed it.... it didn't cut.... not even scratch..... I did a test cut and again the carriage was looking like it was cutting...
  20. sp540v flex / data cable and encoder strip

    hi all how often should we change flex/data cable and encoder strip? is twice a year replacement considerable? thanks advance
Top