support

Hello all, For 5' x 3' signs made of either corrugated plastic or ACM panels, do they need to be back-supported by a sheet of plywood or something to withstand wind etc or will screwing them directly to a frame of the same size be enough to keep them in place? If no support is needed, what...

We installed Samsung LED modules in several channel letter signs last year. Now, suddenly, many of them are failing with no apparent cause. The supplier who sold them to us has gone out of business, and we are having zero luck getting through to the right department at Samsung. Does anyone...

I have an issue with this JV33-260BS printer, during printing any file (even pattern test) it prints on a permanent distance spacing a dashed line (see attached picture), I have replaced nearly all the PCBs except for the main board. If anyone has had a situation like this I would really...

We have a Mutoh 628 X that we purchased a few years back to get our feet "wet" in the digital printing world. (Cut vinyl for years). We are now purchasing a larger machine this week, but want to use the small Mutoh for decals etc. Does anyone know where 1. we can get parts for it and 2. where we...

Hi does anyone have experience with WhiteRip? it looks to be suitable for our needs but we are concerned about lack of support & supplier lack of contact, below is an email i sent to there support a few days after trialling the Demo & trying to get a price to buy. "Good morning, we are very...

We have been loyal Roland users for about 13 years, but that counts for nothing. Called to ask what should be a simple question and they want a payment to give any help. When we bought our EGX-400 from them we were told LIFETIME tech support over the phone. That was never the deal, they changed...

Looking for galvanized 1/4" wire rope for flag mount sign support. We had a roll for twenty years and it finally ran out. Our supplier doesn't carry it anymore and I cannot find any at the local marine supply store. This wire rope is great for supporting stickout signs. We would loop it through...

I am brand new to signs 101, but this site really helped me solve a printer problem by recommending a technical resource. Our Colorspan 72UVR had a UV Control Error. I couldn't get help from the large, national supplier who sold us the printer (even though I was willing to pay for support)...

Hello All, I just wanted to let everyone know that I had a SP-540V which had problems with banding lines throughout the prints. I called VTS, and spoke to Brian. Brian forwarded my number to one of the Technicians called Kevin. When Kevin called me back, he was really helpful giving me...

Hi gang, Thought I would try out this site and see what the sign community has to offer and what I could offer them! Already reading some of the posts, seems like a fun group with plenty to teach! I am in business doing printer, fax, copier and wide format plotter repair, sales and supplies...

Hey guys. I'm having trouble with the Graphtec. whenever I try to cut an image everything seems to get out of line. For example if I'm trying to cut the letters A B C D. A will be in one place and B will be almost a quarter inch lower then C will over lap D. At first I was using FlexiEXPERT...