temperature

This is the first error I've got that isn't a service call, so it seems like this one should be easy to fix. The ambient temperature is room temp, so that's not the problem. Seems like a faulty thermistor or something so I'll try to locate that and check the connections. Got any ideas what the...

Hi guys I am pretty new to large format digital printing, graphic designer by trade. I have a large wooden shed/cabin as a studio which is made from 19mm tongue and groove with 1 good layer of fibreglass insulation with plasterboard interior walls. Heat is only on if I am in the studio which is...

Hi everyone, I use a Mimaki CJV30-160, and I normally print on 13oz - 15oz scrim banner material. We ordered a 20oz banner for a customer and I don't know if it would be okay to keep the current temperature settings. Pre 30 | Prt 30 | Post 42 (all set by the gentleman who previously owned the...

I have a 2005 SJ745EX ProII and the platen temperature will not hold at the desired setting. It always goes to the maximum. I have the service notes manual 5th edition dated Jan 06. It does not describe any troubleshooting methods for this issue. It does show the various components and they...

JV3-250SP being run by Onyx 7.3, on Windows 7 64-bit, through Firewire. Had a second overnight print do absolutely nothing yesterday, due to a weird temperature issue. Every now and then, when I have multiple things in the queue, it'll run through the first item no problem, and then it'll do...

After reinstalling main board back from repair, due to shorting cause by head cable. I also installed new head Carriage Board and new head cable, reinstalled print heads with new dampers, now I am getting the message Temperature too low in dialog window. I am not sure how to correct this...