uv flatbed printer

So the print shop I work at uses a Canon Arizona 1360GT flatbed UV printer to make large signs on coroplast. I always clean the coroplast with a suggested fingerprint remover formula of 14 oz water, 10 oz of Simple Green and 14oz of denatured alcohol. And I always wait until it's totally dry and...

Sold

Sold

The print shop I work at uses the Roll Media Option on the Arizona 1360 UV flatbed to print banners. So here's the latest problem. If you have this machine then you know how tricky/annoying it is with the foot pedal controls for the roll media load/unload process. If you press one of the two...

If I have a 48x96.5" inch sheet of coroplast and the bed goes to 48x96, can it go beyond the 96" width and by how much? I know it can go past the zero inch mark on the left because bleeds are possible. Reason I ask is I have a 2-sided 48x96 sign to print and the sheet is actually 96.5 inches...

The lm printhead on our HP FB750 printer has shot an error message for several months now, saying that the "printhead warmer is too warm" or "printhead warmer failed." I knew this would eventually lead to total printhead failure, and now since we're at that point.. does anyone have any advice...

Where do you get your jigs?

Just out of curiosity, what is the weirdest thing you've printed on using a flatbed? We recently started printing on ceiling tiles and have had some success. This got me thinking, "what else can we print on?".

I am having one heck of a time printing quality prints on styrene .04 with the Scitex FB700. The belt has ink buildup (which I have been working to get it off, it wasn't taken care of before I started this position) I know that could be part of the problem. But even on photo plus and fine text...

I am an experienced sign maker and digital printer and I have never had to clean foamcore before but my recent foamcore deliveries have been pretty bad in terms of cleanliness. Here are the facts: UV Flatbed Printing (Oce' Arizone 365 CMYK) ALWAYS wearing Nitrile Gloves and nevver touch...

Hello yall, I've been doing research on getting a uv-flatbed for our company for a few weeks now and finally felt it better to ask some people with some real know-how instead. We've been looking into bring printing in-house as we're first, the only ones in our field still outsourcing and second...

Hello everyone, I have a very specific use case which is to print direct to 8.5 x 11 sheets of acrylic face mounted, so I can leave some sections of the image transparent. I am looking to buy a brand new printer that's best for this application, and my budget is ideally 30k - 50k. It would be...

I purchased a Funsun A1 UV printer. I have not seen one post on this company. The design of the printer seems pretty simple. I have had some problem or another from the get go. When I finally had it working the company would not answer my questions anymore. It uses an Epson DX8 print head...

I purchased a UV Printer from a company called Funsun in China. It uses 2 programs to print Ultraprint that creates a .pnt file, and Wellprint to RIP to the printer and control the printer functions. Anyone ever hear of these? They seem lacking...

Hi I am new to UV printing and i'm having a hard time printing in white with rasterlink 5. We have just acquired a mimaki 6042 and I am trying to print an image in white but do not know where to start. The image has a lot of different colours but I just want the whole image to be printed in...

2017 Scitex FB550 - $28,500 Highlights: MINT condition. Only used by a person with 10 years of industry experience. Printer was kept in a clean, sealed room. Includes 4 brand new print heads installed by HP technicians on 1/18/19. Printer has been used daily since install in April of...

Hello all. Last year I purchased a Mutoh 426uf. Owning an engraving business, I wanted to introduce color graphics to my inventory. The training was brief and after a week I noticed my ink levels were surprisingly low. I brought this to the attention of my mutoh rep and he said the initial...

Today is the last day of Specialty Graphic Imaging Association #SGIAExpo2018. Come down and take a look at the #Flora PP2512UV printing up to 24 4x8 sheets an hour. APS is in booth 4527.

American Printing Systems (APS), headquartered in Wharton, NJ, has been appointed as the exclusive distributor of Flora UV printers in the United States effective September 1st 2018 by Shenzhen Runtianzhi Digital Equipment Co., Ltd, the makers of Flora UV Printers. APS was started by Dave...

purchased new 2 years ago. We are not a sign company, we purchased it for a product we intended to produce. Has Konica Minolta KM1024 Series print heads for faster printing and is set up for white as well. CMYK+LC+LM + White. Prints directly to substrate. Paid over $90k new, looking for best...