just getting started in this field.......electrician by trade and have a desire to get a wide format printer/cutter........what is the best unit to go with and is it like a boat? if I get a small 1 will I always want a bigger 1? would it be a mistake for me to start out with a 64" and whose is user friendly and would be recommended? Just starting would I need anything else? Recently purchased a toshiba satellite laptop (a year and a half now) I know already outdated but would it suffice? other computer is a mac tower 0S10 so thought I needed pc platform for corel draw? Could anybody point me in the right direction? thanks
-
I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes. Click to Support Signs101 ...
first time so be gentle with me
- Thread starter wirenut
- Start date
J Hill Designs
New Member
SignosaurusRex
Active Member
Well......How much disposable income have you got and can you afford to loose it?
TwoNine
New Member
Well. No, printers are not like boats. You still want to do this?
J/K....Kind of.
Best advise: Go work in a real shop for some time and see if this is what you want to do. There are a LOT of good shops who would LOVE to hire a licensed electrician.
That is honestly my best advise.
-Chad
J/K....Kind of.
Best advise: Go work in a real shop for some time and see if this is what you want to do. There are a LOT of good shops who would LOVE to hire a licensed electrician.
That is honestly my best advise.
-Chad
J Hill Designs
New Member
Best advise you will ever get
Fred Weiss
Merchant Member
kylebrk
New Member
No, you're laptop wont be good.
What do you want to print?
Are you going to do wraps? Fine Art? Banners? Posters? Decals? Labels?
Are you an experienced designer or have access to one?
Do you have any research on your market to dictate buying a printer?
Are the other sign shops in your market healthy?
If you're an electrician, should consider buying a good bucket truck instead of a printer?
The guys are being sarcastic, but it's the truth. You saying you have an old laptop and want to buy a printer is the exact same as saying I have tool belt and would love to buy a utility truck to become an electrician.
It's okay to be green. Just understand that a lot of the older guys take offense to anyone insinuating that the sign industry is as simple as buying a laptop and a printer.
If you have the money to start. Wait on it, go work at a shop and get some real experience. I guarantee you it's not what you expect. It might be better than you expect. However, you should find that out on someone else's dime. Not by wasting a ton of your own money and whoring out the market while you figure what the hell you're doing.
TwoNine
New Member
+1 :iamwithstupid
Gino
Premium Subscriber
Nope. Many of the younger knowledgeable ones feel the same way.
Age doesn't mean anything.... other than we've been around the block a few more times and can see things more clearly than some others. However, you are correct about the rest of what you said.
My question is the same. Why... if you are a qualified electrician, put time and money into training and becoming certified would you want to just jump into an industry, where you basically know nothing and have a coupla grand to throw around without any insight or knowledge ?? That sounds not only foolish but irresponsible. What drugs did you take or silly television show did you watch to come up with..... Hey, I'm gonna buy 40 grand of equipment and see if I can make it work.... for me. Isn't it far less expensive to buy the equipment to become a cobbler or an electrical consultant ??
Mosh
New Member
You will need more than a laptop, try more like a $2K-$3K graphic made system for doing the RIP, you will need felxi or signlab software to make cutting easier ($3K-$4K), a lamintor ($7K-$12K), printer (64" $18K and up) PLUS about $5K of "odds and ends" tools and equipment (too many to list on here) Plus a dust free eviroment controlled area to do all this in. All this would be a starter, bare-bones operation.
BTW do you even kow about RIP?
LOL.... Cri-Cut now Cri-cobbler
BTW do you even kow about RIP?
LOL.... Cri-Cut now Cri-cobbler
Sticky Signs
New Member
I would think that a 54" printer/cutter (Roland, mimaki or other) would be a good start. You will also need at least a 55" laminator.
A good computer and up to date software is also a must.
A good work table with straight edges and various other tools will also come in handy.
Buying the above equipment is probably the bare minimum that you need to get started and will allow you to produce a wide variety of signage. keep in mind that you will also need to deal with a huge, expensive learning curve.
Best of luck!
A good computer and up to date software is also a must.
A good work table with straight edges and various other tools will also come in handy.
Buying the above equipment is probably the bare minimum that you need to get started and will allow you to produce a wide variety of signage. keep in mind that you will also need to deal with a huge, expensive learning curve.
Best of luck!