Free Stuff For Y'all

[CanDoASign4U]

Thank you for sharing!

 

[jfiscus]

Utility Truck Work Body Template (River City Body). 1/10 Scale, enjoy!

 

[jfiscus]

Great Work

Jfiscus you have to put together a tutorial of how you are doing this. Very helpful! Thank you!

I know this is an old message to reply to, but the basics is just LOTS of careful measurements.

 

[jfiscus]

Here is a "fair trailer" template, @ 10 pct scale. Enjoy!

 

[jfiscus]

Here is a template for a 2017(?) E-Z-Go Freedom. Enjoy!
Scaled to full size; if yours doesn't have windows/roof/back seats remove those parts.

 

[SignsSupport]

Here is a template for a 2017(?) E-Z-Go Freedom. Enjoy!
Scaled to full size; if yours doesn't have windows/roof/back seats remove those parts.
View attachment 137263

Nice work. Thanks so much for the generous share.
Cheers!

SignsSupport

 

[jfiscus]

I've always hated guessing at the dimensions for logos on hoods on the new Ford Transits, so I just went ahead and made this template so it wasn't an issue anymore. Enjoy!

 

[jfiscus]

Here is another (Grumman?) aluminum delivery truck template. 10% scale.
Enjoy!

 

[jfiscus]

Here is a band trailer template; I'm sure no two are the exact same, but hopefully this helps someone get a good start on one.
1/10 scale.

 

[jfiscus]

This is a mail services truck built on a golf cart body. First one I've seen, but maybe yall will run into them soon also?
1/10 scale.

 

[jfiscus]

Here is another food truck I just drew today. Hopefully this helps someone else not have to draw these, lol.
1/10 scale.

 

[jfiscus]

Here is a (used) hose truck I just drew up for a wrap project.
Not sure if it'd ever be of use to anyone else here, but it's here anyways. It's an E-One.

 

[jfiscus]

Yet another random ambulance template. Use it if you can.
1/10 scale. Put your own PVO front template on it for the cab.

 

[jfiscus]

Been busy drawing a lot of stuff today, lol.
Here's a template for a 20' Conex Container. 1/10 scale.

 

[jfiscus]

Here is a shuttle bus, 1/10 Scale.
Yes, I know the front/rear are off-center, I don't make the buses, I just make the templates from them.

 

[jfiscus]

Finally had to draw a Dodge Charger door swoosh up for a fleet vehicle.
For a 1-off vehicle I'd suggest knifeless tape, but when they have 10+ and park them all next to each other that's always gonna look weird.
Here you go!

 

[jfiscus]

Here is a template for a 2018 (and other years) Dodge Promaster (Full Size) Hood.
Customers wanted their logo to flow along the bodylines of this hood, so I had to draw it up to get the curves right.
Figure someone else might run into this same issue.

 

[Pixels Are Bad Mmmkay?]

Here is a template for a 2018 (and other years) Dodge Promaster (Full Size) Hood.
Customers wanted their logo to flow along the bodylines of this hood, so I had to draw it up to get the curves right.
Figure someone else might run into this same issue.

I'll be working on two of these next week. Thanks!

 

[jfiscus]

Finally thinking about wrapping my old canoe. Was kinda tricky to figure out a template, but it had a great straight centerline to measure from.

 

[jfiscus]

Vertical Sheet Materials Storage Rack.
Tested and works great for materials storage for our router, and will work for flatbed printer sheets also.