UCJV330 Pull Back Printing (Multi Layer printing)

[sad_makaronchi]

I'm currently printing color >pullback then multiple overprints of clear, so unfortunately no way to do this without multiple overprints of color.

I will look into blade offset. It also looks like there is a setting for registration mark offset in the Image Edit page. Not sure if this offsets the placement of the marks, or the reading of the marks, but I try to will play with it today and see.

Try to expand area of search mark, maybe it is will solve problem

 

[RonnyCrack]

Print white layer, then pull-back media and print clear + cmyk

Do you happen to know of any other operation parameter functions? Specifically, I am looking for a way to lower/disable only the back half of the UV LEDs.

When the print starts, only the front half of the LEDs light up, and an inch or two into the print, the back half of the LEDs turn on. I am trying to lessen the cure on my prints for testing multiple overprints of embossed gloss.

 

[sad_makaronchi]

Вы случайно не знаете о других функциях параметров работы? В частности, я ищу способ понизить/отключить только заднюю половину УФ-светодиодов.

Когда начинается печать, загорается только передняя половина светодиодов, а через один-два дюйма от печати загорается задняя половина светодиодов. Я пытаюсь уменьшить время отверждения на моих отпечатках для тестирования нескольких наложений тисненого глянца.

Maybe adjusting uv intensity help you, I don't know exactly

 

[sad_makaronchi]

Do you happen to know of any other operation parameter functions? Specifically, I am looking for a way to lower/disable only the back half of the UV LEDs.

When the print starts, only the front half of the LEDs light up, and an inch or two into the print, the back half of the LEDs turn on. I am trying to lessen the cure on my prints for testing multiple overprints of embossed gloss.

Do you want to get something similar? It printed on ucjv300 with pullback, cmyk+white+clear

 

[RonnyCrack]

Do you want to get something similar? It printed on ucjv300 with pullback, cmyk+white+clear

I just mean, when I compare my Mimaki gloss to Roland gloss, the Roland gloss seems smoother. But your print does look very solid. How many clear overprints?

 

[sad_makaronchi]

2 layer clear

Я просто имею в виду, когда я сравниваю свой глянец Mimaki с глянцем Roland, глянец Roland кажется более гладким. Но ваш отпечаток выглядит очень цельным. Сколько прозрачных отпечатков?

 

[dinomaskot]

2 layer clear

Does your clear feel sticky?

 

[sad_makaronchi]

Ваш лак липкий на ощупь?

yes, but i use non-original ink

 

[dinomaskot]

yes, but i use non-original ink

I use original, and its sticky as well..

 

[RonnyCrack]

yes, but i use non-original ink

Switch to STS LUS-170 clear ink, no more sticky

 

[RonnyCrack]

I use original, and its sticky as well..

Try STS inks LUS-170. I switched months ago and it's been great, non sticky, hard gloss prints. Can even get them smoother than OEM because I can lower the UV light adjustment and still get rock hard 150% gloss prints.

 

[sad_makaronchi]

Try STS inks LUS-170. I switched months ago and it's been great, non sticky, hard gloss prints. Can even get them smoother than OEM because I can lower the UV light adjustment and still get rock hard 150% gloss prints.

I can’t change clear ink on sts because in my country sts lus 170 not sale

 

[sad_makaronchi]

I use original, and its sticky as well..

does clear ink have yellow shade on original? My clear ink have light yellow shade, it’s not problem, but i,m interested original has the same property or not

 

[Smoke_Jaguar]

Yes, the yellow tint is normal. It will get darker over time (uncured) depending on how the ink is stored or how far out of date it is.

 

[RonnyCrack]

I can’t change clear ink on sts because in my country sts lus 170 not sale

Are you able to get LUS-120 ink with an LUS-170 chip?

I am going to try this next.

 

[sad_makaronchi]

Are you able to get LUS-120 ink with an LUS-170 chip?

I am going to try this next.

Nope, none of sts, for mimaki only marabu, artix and maybe sunchemical

 

[RonnyCrack]

Nope, none of sts, for mimaki only marabu, artix and maybe sunchemical

Sorry, I meant are you able to get one of those in a harder form like LUS-170 equivalent. Marabu/Artix/Sun chemical may be willing to send you a LUS120 ink bottle with a LUS170 chip to trick your machine into using a harder ink.