• I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes. Click to Support Signs101 ...

Recent content by B Snyder

  1. long lasting print on coroplast

    How and where are these corrugated signs going to be installed?

  2. long lasting print on coroplast

    Do you print with UV or solvent/eco-solvent inks?

  3. recommend a shear to cut 040 / 080 aluminum?

    Something like this should work. http://www.baileigh.com/foot-stomp-shear-sf-5216e They also have a heavy duty version on the site.

  4. Tilt Brush by Google

    There are still things in Photoshop I haven't figured out yet....
  5.

    Stakes, posts or rods for 10mm corrugated?

    Sorry, I should have mentioned these signs would be double sided.
  6.

    Stakes, posts or rods for 10mm corrugated?

    Thanks, I'll take a look for them.
  7.

    Stakes, posts or rods for 10mm corrugated?

    These signs wouldn't be 4x4. I was thinking the rods would be 60". 24" in the ground and 36" inside the corrugations (to the top of the sign).
  8.

    Stakes, posts or rods for 10mm corrugated?

    I want to put 36hx48w 10mm corrugated signs at ground level on a lawn for a few months. Has anyone done this with 3/8" threaded rods or similar? 3 rods per sign?
  9.

    Font ID Request

    Thank you. I'll check it out.
  10.

    Font ID Request

    Tried WTF already. Thanks!
  11.

    Boat pinstriping, 2 colors, ready for application, 25 feet.

    If i remember correctly, gregory1.com specializes in this sort of thing.
  12.

    Cutting alignment issue - please see pic

    I have it working well again. (See pic). Not sure why the machine likes it better this way but it works. I actually have these printing 70-up, fitting an 8.5x11 area. Thanks! :)
  13.

    Cutting alignment issue - please see pic

    Got me. I've tried 3 times and tried complete shut down of the machine between. I should include, this is a print/lam/cut job.
  14.

    Cutting alignment issue - please see pic

    Designed in Corel, exported as .eps. Using VersaWorks and VP-540. Same way I've print/cut millions of decals in the past. The cutting begins at the right most decal where the cut is off the most and works its way to the left most decal where the cut is made perfectly.

  15. Curling bumper stickers

    Arlon's DPF 510 lays flat and is super cheap. I think it's 3.2 mil thick.
See more
Top