I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes.
Click to Support Signs101 ...
Can anyone help with this?
Strange lines along x which shadow the yellow shapes. But are offset left and down about an inch (2.5cm)
They only show up when printing something with yellow.
Suggest you research the pro kits at CNC router parts. Because they come as a kit you will be your own mechanic and trouble shooter. They do both with the optional blade kit. And are affordable. They are also modular and expandable. Very capable machines for the buck by all accounts. I...
What is the common wisdom on pressure speed etc. for cutting laminated prints? Both high performance like 3m-180 and intermediate calander vinyls and laminates.
Does anyone use a lower pressure and 2 or more passes?
Do you test cut every time?
Thanks, DK
i have used a sled in the past as it was the only way with my daigle.
i really want to find a way to do without.
i had much more success when the vinyl came off the feed roller.
Worst case when it started to wave. i back it up an inch, lift the top roller then put it back down and continue...
laminating problem
i have been trying to laminate cut sheets. And yes i have been very careful to load every thing correctly.
Is this merely an expected result if not using the mounted feed roller and tension?
Hi everyone,
Here i thought i finally had a good laminator after struggling with my daigle quick mount for years.
Now i have a GMP excelam cold laminator. Its built like a tank. both rollers appear to be perfectly straight an well adjusted.
But when i laminate a full 54" with material it...
I'm on the west coast and a new roland owner. But i have been pleased with a new service and supply provider. Pony Graphic Solutions. i know they have a presence back east too. Might be worth a try.
So After i did a Step adjustment on my tired old printer to get rid of some banding. My prints are coming out about 96% of the intended length.
So i am trying to do a distance adjust through the functions menu.
x-distance is 1000
So i set the real distance to 0960
but i am not able to confirm...
Can anyone help me with a review of this machine.
i am ready to throw my mutoh under my truck and want to make the right choice next time. reliability is everything to me.
Print quality and performance and finally feasability on consumables etc.
Or feel free to send me in another direction...
capping suction
Ok so i wet the cap with no result.
Did the filling routine.
Finally switched out the upper portion of the new capping station with the old one.
And was able to get ink flowing.
is there any way to adjust these things or ?
Also know as a falcon outdoor jr.
I just did an extensive tune up including replacement of:
pump
capping station
both print heads
and all dampers.
Not sure how to recharge the system to get started again.
tried pulling some through the new capping station to fill the dampers but a can't sence...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.